Skip Main Navigation Skip To Navigation Content

Foreign Trade

Skip top of page navigation
You are here: Census.govBusiness & IndustryForeign Trade › Definitions
Skip top of page navigation
Section XVI - Chapter 84
Nuclear Reactors, Boilers, Machinery and Mechanical Appliances; Parts Thereof
Notes
1. This chapter does not cover:
(a). Millstones, grindstones or other articles of chapter 68;
(b). Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (chapter 69);
(c). Laboratory glassware (heading 7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 7019 or 7020);
(d). Articles of heading 7321 or 7322 or similar articles of other base metals (chapters 74 to 76 or 78 to 81);
(e). Vacuum cleaners of heading 8508;
(f). Electromechanical domestic appliances of heading 8509; digital cameras of heading 8525; or
(g). Hand-operated mechanical floor sweepers, not motorized (heading 9603).
2. Subject to the operation of note 3 to section XVI, and subject to note 9 to this chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424, or heading 8486 and at the same time to a description in one or oth er of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486, as the case may be, and not the latter group.

Heading 8419 does not, however, cover:

(a). Germination plant, incubators or brooders (heading 8436);
(b). Grain-dampening machines (heading 8437);
(c). Diffusing apparatus for sugar juice extraction (heading 8438);
(d). Machinery for the heat treatment of textile yarns, fabrics or made up textile articles (heading 8451); or
(e). Machinery or plant, designed for mechanical operation, in which a change of temperature, even if necessary, is subsidiary.

Heading 8422 does not cover:

(a). Sewing machines for closing bags or similar containers (heading 8452); or
(b). Office machinery of heading 8472.

Heading 8424 does not cover:

(a). Ink jet printing machines (heading 8443); or
(b). Water-jet cutting machines (heading 8456).
3. A machine tool for working any material which answers to a description in heading 8456 and at the same time to a description in heading 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified in heading 8456.
4. Heading 8457 applies only to machine-tools for working metal other than lathes (including turning centers), which can carry out different types of machining operations either:
(a). By automatic tool change from a magazine or the like in conformity with a machining program (machining centers);
(b). By the automatic use, simultaneously or sequentially, of different unit heads working on a fixed-position workpiece (unit construction machines, single station); or
(c). By the automatic transfer of the workpiece to different unit heads (multi-station transfer machines).
5. (A). For purposes of heading 8471, the expression "automatic data processing machines" means machines capable of:
(i). Storing the processing program or programs and at least the data immediately necessary for the execution of the program;
(ii). Being freely programmed in accordance with the requirements of the user;
(iii). Performing arithmetical computations specified by the user; and
(iv). Executing, without human intervention, a processing program which requiresthem to modify their execution, by logical decision during the processing run.
(B). Automatic data processing machines may be in the form of systems consisting of a variable number of separate units.
(C). Subject to paragraphs (D) and (E) below, a unit is to be regarded as being part of an automatic data processing system if it meets all of the following conditions:
(i). It is of a kind solely or principally used in an automatic data processing system;
(ii). It is connectable to the central processing unit either directly or through one or more other units; and
(iii). It is able to accept or deliver data in a form (codes or signals) which can be used by the system.

Separately presented units of an automatic data processing machine are to be classified in heading 8471.

However, keyboards, X-Y coordinate input devices and disk storage units which satisfy the conditions of paragraphs (C) (ii) and (C) (iii) above, are in all cases to be classified as units of heading 8471.

(D). Heading 8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in note 5(C) above:
(i). Printers, copying machines, facsimile machines, whether or not combined;
(ii). Apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network);
(iii). Loudspeakers and microphones;
(iv). Television cameras, digital cameras and video camera recorders;
(v). Monitors and projectors, not incorporating television reception apparatus.
(E). Machines incorporating or working in conjunction with an automatic data processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in res idual headings.
6. Heading 8482 applies, inter alia , to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 percent or by more than 0.05 mm, whichever is less. Other steel balls are to be classified under h eading 7326.
7. A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.

Subject to note 2 to this chapter and note 3 to section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 8479. Heading 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials.

8. For the purposes of heading 8470, the term "pocket-size" applies only, to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.
9. (A). Notes 8(a) and 8(b) to chapter 85 also apply with respect to the expressions semiconductor devices and electronic integrated circuits, respectively, as used in this note and in heading 8486. However, for the purposes of this note and of heading 8486, t he expression semiconductor devices also covers photosensitive semiconductor devices and light emitting diodes.
(B). For the purposes of this note and of heading 8486, the expression manufacture of flat panel displays covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other ele ctronic components onto the flat panel. The expression flat panel display does not cover cathode-ray tube technology.
(C). Heading 8486 also includes machines and apparatus solely or principally of a kind used for:
(i). the manufacture or repair of masks and reticles;
(ii). assembling semiconductor devices or electronic integrated circuits;
(iii). lifting, handling, loading or unloading of boules, wafers, semiconductordevices, electronic integrated circuits and flat panel displays.
(D). Subject to note 1 to section XVI and note 1 to chapter 84, machines and apparatus answering to the description in heading 8486 are to be classified in that heading and in no other heading of the nomenclature.
Subheading Notes
1. For the purposes of subheading 8471.49, the term "systems" means automatic data processing machines whose units satisfy the conditions laid down in note 5(C) to chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).
2. Subheading 8482.40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Schedule B No. and Headings Commodity Description Unit of Quantity Second Quantity
84 Nuclear Reactors, Boilers, Machinery and Mechanical Appliances; Parts Thereof
84.01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation; parts thereof:
8401.10.0000 - - Nuclear reactors t
8401.20.0000 - - Machinery and apparatus for isotopic separation, and parts thereof t
8401.30.0000 - - Fuel elements (cartridges), non-irradiated, and parts thereof X
8401.40.0000 - - Parts of nuclear reactors t
84.02 - Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof:
- - Steam or other vapor generating boilers:
- - - per hour t
8402.11.0000 - - - Watertube boilers with a steam production exceeding 45 t
8402.12.0000 - - - Watertube boilers with a steam production not exceeding 45 t per hour t
8402.19.0000 - - - Other vapor generating boilers, including hybrid boilers t
8402.20.0000 - - Super-heated water boilers t
8402.90 - - Parts:
8402.90.0010 - - - Heat exchangers t
8402.90.0090 - - - Other X
84.03 - Central heating boilers (other than those of heading 8402) and parts thereof:
8403.10.0000 - - Boilers No.
8403.90.0000 - - Parts X
84.04 - Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economizers, super-heaters, soot removers, gas recoverers); condensers for steam or other vapor power units; parts thereof:
8404.10 - - Auxiliary plant for use with boilers of heading 8402 or 8403:
8404.10.0010 - - - Economizers t
8404.10.0050 - - - Other (except parts) t
8404.20.0000 - - Condensers for steam or other vapor power units t
8404.90.0000 - - Parts X
84.05 - - Parts
8405.10.0000 - - Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers X
8405.90.0000 - - Parts X
84.06 - Steam turbines and other vapor turbines, and parts thereof:
8406.10 - - Turbines for marine propulsion:
8406.10.1000 - - - Steam turbines No.
8406.10.9000 - - - Other No.
- - Other turbines:
8406.81 - - - Of an output exceeding 40 MW (53,619 hp):
8406.81.1000 - - - - Steam turbines No.
8406.81.9000 - - - - Other No.
8406.82 - - - Of an output not exceeding 40 MW (53,619 hp):
8406.82.1000 - - - - Steam turbines No.
8406.82.9000 - - - - Other No.
8406.90 - - Parts:
8406.90.0040 - - - Of steam turbines X
8406.90.0080 - - - Other X
84.07 - Spark-ignition reciprocating or rotary internal combustion piston engines:
8407.10 - - Aircraft engines:
- - - For use in civil aircraft:
- - - - New:
8407.10.0020 - - - - - Less than 373 kW (500 hp) No.
8407.10.0040 - - - - - 373 kW (500 hp) or over No.
8407.10.0060 - - - - Used or rebuilt No.
8407.10.0090 - - - Other No.
- - Marine propulsion engines:
8407.21.0000 - - - Outboard motors No.
8407.29 - - - Other:
8407.29.0010 - - - - Inboard engines with outboard drive No.
8407.29.0050 - - - - Inboard engines with inboard drive No.
- - Reciprocating piston engines of a kind used for the propulsion of vehicles of chapter 87:
8407.31.0000 - - - Of a cylinder capacity not exceeding 50 cc No.
8407.32 - - - Of a cylinder capacity exceeding 50 cc but not exceeding 250 cc:
8407.32.2000 - - - - To be installed in vehicles of subheading 8701.20, or heading 8702, 8703 or 8704 No.
8407.32.5000 - - - - Other No.
8407.33 - - - Of a cylinder capacity exceeding 250 cc but not exceeding 1,000 cc:
8407.33.2000 - - - - To be installed in vehicles of subheading 8701.20, or heading 8702, 8703 or 8704 No.
8407.33.5000 - - - - Other No.
8407.34 - - - Of a cylinder capacity exceeding 1,000 cc:
- - - - To be installed in vehicles of subheading 8701.20, or heading 8702, 8703 or 8704:
8407.34.2030 - - - - - Of a cylinder capacity not exceeding 2,000 cc No.
8407.34.2090 - - - - - Other No.
8407.34.5000 - - - - Other No.
8407.90 - - Other engines:
- - - To be installed in agricultural or horticultural machinery or equipment:
8407.90.1010 - - - - Less than 4,476 W (6 hp) No.
8407.90.1050 - - - - Other No.
- - - Other:
8407.90.9010 - - - - Gas (natural or LP) engines (except gas turbines) No.
- - - - Other:
8407.90.9030 - - - - - Less than 4,476 W (6 hp) No.
8407.90.9050 - - - - - Other No.
84.08 - Compression-ignition internal combustion piston engines (diesel or semi-diesel engines):
8408.10 - - Marine propulsion engines:
8408.10.0010 - - - Not exceeding 149.2 kW (200 hp) No.
8408.10.0020 - - - Exceeding 149.2 kW (200 hp) but not exceeding 223.8 kW (300 hp) No.
8408.10.0030 - - - Exceeding 223.8 kW (300 hp) but not exceeding 373 kW (500 hp) No.
8408.10.0040 - - - Exceeding 373 kW (500 hp) but not exceeding 746 kW (1,000 hp) No.
8408.10.0050 - - - Exceeding 746 kW (1,000 hp) No.
8408.20 - - Engines of a kind used for the propulsion of vehicles of chapter 87:
8408.20.2000 - - - To be installed in vehicles of subheading 8701.20, or heading 8702, 8703 or 8704 No.
8408.20.5000 - - - Other No.
8408.90 - - Other engines:
8408.90.1000 - - - To be installed in agricultural or horticultural machinery or equipment No.
- - - Other:
8408.90.9010 - - - - Not exceeding 149.2 kW (200 hp) No.
8408.90.9020 - - - - Exceeding 149.2 kW (200 hp) but not exceeding 373 kW (500 hp) No.
8408.90.9030 - - - - Exceeding 373 kW (500 hp) but not exceeding 746 kW (1,000 hp) No.
8408.90.9040 - - - - Exceeding 746 kW (1,000 hp) but not exceeding 1,119 kW (1,500 hp) No.
8408.90.9050 - - - - Exceeding 1,119 kW (1,500 hp) No.
84.09 - Parts suitable for use solely or principally with the engines of heading 8407 or 8408:
8409.10 - - For aircraft engines:
8409.10.0040 - - - For use in civil aircraft kg
8409.10.0080 - - - Other kg
- - Other:
8409.91 - - - Suitable for use solely or principally with spark-ignition internal combustion piston engines (including rotary engines):
8409.91.4000 - - - - For vehicles of subheading 8701.20, or heading 8702, 8703 or 8704 kg
8409.91.6000 - - - - For marine propulsion engines kg
8409.91.8000 - - - - Other kg
8409.99 - - - Other:
8409.99.4000 - - - - For vehicles of subheading 8701.20, or heading 8702, 8703 or 8704 kg
8409.99.6000 - - - - For marine propulsion engines kg
8409.99.8000 - - - - Other kg
84.10 - Hydraulic turbines, water wheels and regulators thereof; parts thereof:
- - Hydraulic turbines and water wheels:
8410.11.0000 - - - Of a power not exceeding 1,000 kW No.
8410.12.0000 - - - Of a power exceeding 1,000 kW but not exceeding 10,000 kW No.
8410.13.0000 - - - Of a power exceeding 10,000 kW No.
8410.90.0000 - - Parts, including regulators X
84.11 - Turbojets, turbopropellers and other gas turbines, and parts thereof:
- - Turbojets:
8411.11 - - - Of a thrust not exceeding 25 kN:
- - - - Aircraft turbines:
8411.11.4010 - - - - - For use in civil aircraft No.
8411.11.4050 - - - - - Other No.
8411.11.8000 - - - - Other No.
8411.12 - - - Of a thrust exceeding 25 kN:
- - - - Aircraft turbines:
8411.12.4010 - - - - - For use in civil aircraft No.
8411.12.4050 - - - - - Other No.
8411.12.8000 - - - - Other No.
- - Turbopropellers:
8411.21 - - - Of a power not exceeding 1,100 kW:
- - - - Aircraft turbines:
8411.21.4010 - - - - - For use in civil aircraft No.
8411.21.4050 - - - - - Other No.
8411.21.8000 - - - - Other No.
8411.22 - - - Of a power exceeding 1,100 kW:
- - - - Aircraft turbines:
8411.22.4010 - - - - - For use in civil aircraft No.
8411.22.4050 - - - - - Other No.
8411.22.8000 - - - - Other No.
- - Other gas turbines:
8411.81 - - - Of a power not exceeding 5,000 kW:
- - - - Aircraft turbines:
8411.81.4010 - - - - - For use in civil aircraft No.
8411.81.4050 - - - - - Other No.
8411.81.8000 - - - - Other No.
8411.82 - - - Of a power exceeding 5,000 kW:
- - - - Aircraft turbines:
8411.82.4010 - - - - - For use in civil aircraft No.
8411.82.4050 - - - - - Other No.
8411.82.8000 - - - - Other No.
- - Parts:
8411.91 - - - Of turbojets or turbopropellers:
8411.91.4000 - - - - Parts of nonaircraft turbines X
- - - - Parts of aircraft turbines:
8411.91.7010 - - - - - For use in civil aircraft X
8411.91.7050 - - - - - Other X
8411.99 - - - Other:
8411.99.4000 - - - - Parts of nonaircraft gas turbines X
- - - - Parts of aircraft gas turbines:
8411.99.7010 - - - - - For use in civil aircraft X
8411.99.7050 - - - - - Other X
84.12 - Other engines and motors, and parts thereof:
8412.10 - - Reaction engines other than turbojets:
8412.10.0010 - - - Missile and rocket engines No.
8412.10.0090 - - - Other No.
- - Hydraulic power engines and motors:
8412.21 - - - Linear acting (cylinders):
8412.21.0015 - - - - Tie-rod type No.
8412.21.0030 - - - - Weld fused type No.
- - - - Other:
8412.21.0045 - - - - - Telescoping No.
8412.21.0060 - - - - - Rodless No.
8412.21.0075 - - - - - Other No.
8412.29 - - - Other:
8412.29.4000 - - - - Hydrojet engines for marine propulsion No.
- - - - Other:
- - - - - Unlimited rotary acting:
8412.29.8015 - - - - - - Gear type No.
8412.29.8030 - - - - - - Radial piston type No.
8412.29.8045 - - - - - - Axial piston type No.
8412.29.8060 - - - - - - Other No.
8412.29.8075 - - - - - Other No.
- - Pneumatic power engines and motors:
8412.31 - - - Linear acting (cylinders):
8412.31.0040 - - - - Tie-rod type No.
8412.31.0080 - - - - Other No.
8412.39 - - - Other:
8412.39.0040 - - - - Unlimited rotary acting No.
8412.39.0080 - - - - Other No.
8412.80 - - Other engines and motors:
8412.80.1000 - - - Spring-operated and weight-operated motors No.
8412.80.9000 - - - Other X
8412.90 - - Parts:
8412.90.1000 - - - Of hydrojet engines for marine propulsion X
- - - Other:
- - - - Of hydraulic power engines and motors:
8412.90.9005 - - - - - Of linear acting engines and motors X
8412.90.9015 - - - - - Other X
- - - - Of pneumatic power engines and motors:
8412.90.9025 - - - - - Of linear acting engines and motors X
8412.90.9035 - - - - - Other X
8412.90.9050 - - - - Of reaction engines other than turbojets X
8412.90.9080 - - - - Other X
84.13 - Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; parts thereof:
- - Pumps fitted or designed to be fitted with a measuring device:
8413.11.0000 - - - Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages No.
8413.19.0000 - - - Other No.
8413.20.0000 - - Hand pumps, other than those of subheading 8413.11 or 8413.19 No.
8413.30 - - Fuel, lubricating or cooling medium pumps for internal combustion piston engines:
8413.30.1000 - - - Fuel-injection pumps for compression-ignition engines No.
8413.30.9000 - - - Other No.
8413.40.0000 - - Concrete pumps No.
8413.50 - - Other reciprocating positive displacement pumps:
8413.50.0010 - - - Oil well and oil field pumps No.
8413.50.0050 - - - Diaphragm pumps No.
- - - Other:
- - - - Hydraulic fluid power pumps:
8413.50.0070 - - - - - Radial piston type No.
8413.50.0080 - - - - - Other No.
8413.50.0090 - - - - Other No.
8413.60 - - Other rotary positive displacement pumps:
- - - Hydraulic fluid power pumps:
8413.60.0020 - - - - Vane type No.
8413.60.0030 - - - - Gear type No.
8413.60.0040 - - - - Other No.
- - - Other:
8413.60.0050 - - - - Oil well and oil field pumps No.
8413.60.0070 - - - - Roller pumps No.
8413.60.0090 - - - - Other No.
8413.70 - - Other centrifugal pumps:
8413.70.1000 - - - Stock pumps for use with machines for making cellulosic pulp, paper or paperboard No.
- - - Other:
8413.70.2004 - - - - Submersible pumps No.
- - - - Other:
- - - - - Single-stage, single-suction, close-coupled:
8413.70.2005 - - - - - - With discharge outlet under 5.08 cm (2 inches) in diameter No.
8413.70.2015 - - - - - - With discharge outlet 5.08 cm (2 inches) or over in diameter No.
- - - - - Single-stage, single-suction, frame-mounted:
8413.70.2022 - - - - - - With discharge outlet under 7.6 cm (3 inches) in diameter No.
8413.70.2025 - - - - - - With discharge outlet 7.6 cm (3 inches) or over in diameter No.
8413.70.2030 - - - - - Single-stage, double-suction No.
8413.70.2040 - - - - - Multi-stage, single- or double-suction No.
8413.70.2090 - - - - - Other No.
- - Other pumps; liquid elevators:
8413.81 - - - Pumps:
8413.81.0020 - - - - Turbine pumps No.
8413.81.0030 - - - - Household water systems, self-contained; and windmill pumps No.
8413.81.0040 - - - - Other No.
8413.82.0000 - - - Liquid elevators No.
- - Parts:
8413.91 - - - Of pumps:
8413.91.1000 - - - - Of fuel-injection pumps for compression-ignition engines X
- - - - Other:
8413.91.9010 - - - - - Of subheading 8413.30.90 X
8413.91.9050 - - - - - Of hydraulic fluid power pumps X
8413.91.9520 - - - - - Other X
8413.92.0000 - - - Of liquid elevators X
84.14 - Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; parts thereof:
8414.10.0000 - - Vacuum pumps No.
8414.20.0000 - - Hand- or foot-operated air pumps No.
8414.30 - - Compressors of a kind used in refrigerating equipment (including air conditioning):
8414.30.4000 - - - Not exceeding 1/4 horsepower No.
- - - Other:
- - - - Screw type:
8414.30.8010 - - - - - Not exceeding 200 horsepower No.
8414.30.8020 - - - - - Exceeding 200 horsepower No.
- - - - Other:
- - - - - For all refrigerants except ammonia:
8414.30.8030 - - - - - - For motor vehicles No.
- - - - - - Other:
8414.30.8050 - - - - - - - Exceeding 1/4 horsepower but not exceeding 1 horsepower No.
8414.30.8060 - - - - - - - Exceeding 1 horsepower but not exceeding 3 horsepower No.
8414.30.8070 - - - - - - - Exceeding 3 horsepower but not exceeding 10 horsepower No.
8414.30.8080 - - - - - - - Exceeding 10 horsepower No.
8414.30.8090 - - - - - For ammonia No.
8414.40.0000 - - Air compressors mounted on a wheeled chassis for towing No.
- - Fans:
8414.51 - - - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W:
8414.51.0010 - - - - For permanent installation No.
8414.51.0090 - - - - Other (including portable) No.
8414.59 - - - Other:
8414.59.3000 - - - - Turbochargers and superchargers (fan type) No.
- - - - Other:
8414.59.6040 - - - - - Suitable for use with motor vehicles No.
8414.59.9080 - - - - - Other No.
8414.60.0000 - - Hoods having a maximum horizontal side not exceeding 120 cm No.
8414.80 - - Other, except parts:
- - - Air compressors:
8414.80.0500 - - - - Turbochargers and superchargers No.
- - - - Other:
- - - - - Stationary:
- - - - - - Reciprocating:
8414.80.1618 - - - - - - - Not exceeding 11.19 kW (15 hp) No.
8414.80.1642 - - - - - - - Exceeding 11.19 kW (15 hp) but not exceeding 74.6 kW (100 hp) No.
8414.80.1655 - - - - - - - Exceeding 74.6 kW (100 hp) No.
- - - - - - Rotary:
8414.80.1660 - - - - - - - Not exceeding 11.19 kW (15 hp) No.
8414.80.1667 - - - - - - - Exceeding 11.19 kW (15 hp) but not exceeding 74.6 kW (100 hp) No.
8414.80.1675 - - - - - - - Exceeding 74.6 kW (100 hp) No.
8414.80.1680 - - - - - - Other No.
- - - - - Portable:
8414.80.1685 - - - - - - Under 0.57 cubic meters per minute No.
8414.80.1690 - - - - - - Other No.
- - - - Other compressors (including gas compressors):
8414.80.2005 - - - - - Refrigerant recovery units No.
- - - - - Other:
8414.80.2015 - - - - - - Centrifugal and axial No.
- - - - - - Other, including reciprocating and rotary:
8414.80.2055 - - - - - - - Not exceeding 186.5 kW (250 hp) No.
8414.80.2065 - - - - - - - Exceeding 186.5 kW (250 hp) but not exceeding 746 kW (1,000 hp) No.
8414.80.2075 - - - - - - - Exceeding 746 kW (1,000 hp) No.
8414.80.9000 - - - - Other No.
8414.90 - - Parts:
- - - Of fans (including blowers) and ventilating or recycling hoods:
8414.90.1040 - - - - Of fans of subheading 8414.51.00 X
8414.90.1080 - - - - Other X
- - - Of compressors:
8414.90.2015 - - - - Of refrigerating and air conditioning compressors X
8414.90.2095 - - - - Other X
8414.90.9000 - - - Other X
84.15 - Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated; parts thereof:
8415.10 - - Window or wall types, self-contained or "split-system":
- - - Self-contained:
8415.10.3040 - - - - Less than 2.93 kW per hour (10,000 btu/hr.) No.
8415.10.3060 - - - - 2.93 kW per hour or greater but less than 4.98 kW per hour (10,000 thru 16,999 btu/hr.) No.
8415.10.3080 - - - - 4.98 kW per hour or greater (17,000 btu/hr. and greater) No.
- - - Other:
8415.10.6000 - - - - Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps) No.
8415.10.9000 - - - - Other No.
8415.20.0000 - - Of a kind used for persons, in motor vehicles No.
- - Other, except parts:
8415.81 - - - Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps):
- - - - Self-contained:
8415.81.0110 - - - - - Not exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.81.0120 - - - - - Exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.81.0130 - - - - Other No.
8415.82 - - - Other, incorporating a refrigerating unit:
- - - - Self-contained machines and remote condenser type air conditioners other than year-round units:
8415.82.0105 - - - - - Not exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.82.0110 - - - - - Exceeding 17.58 kW per hour (60,000 btu/hr.) No.
- - - - Year-round units (heating and cooling):
8415.82.0115 - - - - - Not exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.82.0120 - - - - - Exceeding 17.58 kW per hour (60,000 btu/hr.) No.
- - - - Room and central station air conditioning units for use with water chillers:
8415.82.0130 - - - - - Room fan coil units No.
8415.82.0135 - - - - - Central station air handlers No.
8415.82.0140 - - - - - Other (including variable air volume terminal units) No.
8415.82.0150 - - - - Dehumidifiers No.
8415.82.0170 - - - - Other air conditioning machines incorporating a refrigerating unit No.
8415.83 - - - Not incorporating a refrigerating unit:
- - - - Heat exchangers including condensing units:
- - - - - Condensing units:
8415.83.0050 - - - - - - Not exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.83.0060 - - - - - - Exceeding 17.58 kW per hour (60,000 btu/hr.) No.
8415.83.0070 - - - - - Other No.
8415.83.0090 - - - - Other air conditioning machines not incorporating a refrigerating unit No.
8415.90 - - Parts:
8415.90.8025 - - - Air conditioning evaporator coils No.
8415.90.9000 - - - Other X
84.16 - Furnace burners for liquid fuel, for pulverized solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof:
8416.10.0000 - - Furnace burners for liquid fuel No.
8416.20 - - Other furnace burners, including combination burners:
8416.20.0040 - - - Gas burners No.
8416.20.0080 - - - Other No.
8416.30.0000 - - Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances X
8416.90.0000 - - Parts X
84.17 - Industrial or laboratory furnaces and ovens, including incinerators, nonelectric, and parts thereof:
8417.10.0000 - - Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals No.
8417.20.0000 - - Bakery ovens, including biscuit ovens No.
8417.80.0000 - - Other, except parts No.
8417.90.0000 - - Parts X
84.18 - Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps, other than air conditioning machines of heading 8415; parts thereof:
8418.10 - - Combined refrigerator-freezers, fitted with separate external doors:
- - - Compression type:
8418.10.0010 - - - - Having a refrigerated volume of under 184 liters (6.5 cubic feet) No.
8418.10.0020 - - - - Having a refrigerated volume of 184 liters (6.5 cubic feet) and over but under 269 liters (9.5 cubic feet) No.
8418.10.0030 - - - - Having a refrigerated volume of 269 liters (9.5cubic feet) and over but under 382 liters (13.5 cubic feet) No.
8418.10.0040 - - - - Having a refrigerated volume of 382 liters (13.5 cubic feet) and over No.
8418.10.0090 - - - Other (including absorption type) No.
- - Refrigerators, household type:
8418.21 - - - Compression type:
8418.21.0010 - - - - Having a refrigerated volume of under 184 liters (6.5 cubic feet) No.
8418.21.0020 - - - - Having a refrigerated volume of 184 liters (6.5 cubic feet) and over but under 269 liters (9.5 cubic feet) No.
8418.21.0030 - - - - Having a refrigerated volume of 269 liters (9.5 cubic feet) and over but under 382 liters (13.5 cubic feet) No.
8418.21.0090 - - - - Having a refrigerated volume of 382 liters (13.5 cubic feet) and over No.
8418.29 - - - Other:
8418.29.1000 - - - - Absorption type, electrical No.
8418.29.2000 - - - - Other No.
8418.30.0000 - - Freezers of the chest type, not exceeding 800 liters capacity No.
8418.40.0000 - - Freezers of the upright type, not exceeding 900 liters capacity No.
8418.50 - - Other furniture (chests, cabinets, display counters, show-cases and the like) for storage and display, incorporating refrigerating or freezing equipment:
8418.50.0040 - - - Freezing No.
8418.50.0080 - - - Other No.
- - Other refrigerating or freezing equipment; heat pumps:
8418.61.0100 - - - Heat pumps other than air conditioning machines of heading 8415 No.
8418.69 - - - Other:
8418.69.0110 - - - - Icemaking machines No.
8418.69.0120 - - - - Drinking water coolers, self-contained No.
8418.69.0130 - - - - Soda fountain and beer dispensing equipment No.
8418.69.0140 - - - - Centrifugal liquid chilling refrigerating units No.
8418.69.0150 - - - - Reciprocating liquid chilling refrigerating units No.
8418.69.0160 - - - - Absorption liquid chilling units No.
8418.69.0180 - - - - Other refrigerating or freezing equipment No.
- - Parts:
8418.91.0000 - - - Furniture designed to receive refrigerating or freezing equipment X
8418.99 - - - Other:
- - - - Refrigeration condensing units:
8418.99.0005 - - - - - Not exceeding 746 W (1 hp) No.
8418.99.0010 - - - - - Exceeding 746 W (1 hp) but not exceeding 2.2 kW (3 hp) No.
8418.99.0015 - - - - - Exceeding 2.2 kW (3 hp) but not exceeding 7.5 kW (10 hp) No.
8418.99.0020 - - - - - Exceeding 7.5 kW (10 hp) but not exceeding 22.3 kW (30 hp) No.
8418.99.0025 - - - - - Exceeding 22.3 kW (30 hp) No.
- - - - Other:
8418.99.0050 - - - - - Parts of combined refrigerator-freezers fitted with separate external doors and parts of household type refrigerators X
8418.99.0060 - - - - - Other (parts of all other refrigerating or freezing equipment) X
84.19 - Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roastin
- - Instantaneous or storage water heaters, nonelectric:
8419.11.0000 - - - Instantaneous gas water heaters No.
8419.19 - - - Other:
8419.19.0040 - - - - Solar water heaters No.
8419.19.0080 - - - - Other No.
8419.20.0000 - - Medical, surgical or laboratory sterilizers No.
- - Dryers:
8419.31.0000 - - - For agricultural products No.
8419.32 - - - For wood, paper pulp, paper or paperboard:
8419.32.1000 - - - - For wood No.
8419.32.5000 - - - - Other No.
8419.39 - - - Other:
8419.39.0140 - - - - For food and beverages No.
8419.39.0180 - - - - Other No.
8419.40 - - Distilling or rectifying plant:
8419.40.0040 - - - For food and beverages No.
8419.40.0080 - - - Other No.
8419.50.0000 - - Heat exchange units No.
8419.60.0000 - - Machinery for liquefying air or other gases No.
- - Other machinery, plant or equipment:
8419.81 - - - For making hot drinks or for cooking or heating food:
8419.81.5000 - - - - Cooking stoves, ranges and ovens No.
- - - - Other:
8419.81.9040 - - - - - Of a type used in restaurants, hotels or similar locations No.
8419.81.9080 - - - - - Other No.
8419.89 - - - Other:
8419.89.1000 - - - - For making paper pulp, paper or paperboard No.
- - - - Other:
- - - - - Designed for cooling:
8419.89.9520 - - - - - - For food and beverages No.
8419.89.9540 - - - - - - Other No.
- - - - - Other:
8419.89.9560 - - - - - - For food and beverages No.
8419.89.9580 - - - - - - For rubber and plastics No.
8419.89.9585 - - - - - - For other materials No.
8419.90 - - Parts:
8419.90.2000 - - - Of machinery and plant for making paper pulp, paper or paperboard X
- - - Other:
8419.90.8500 - - - - Of electromechanical tools for working in the hand with self-contained motor X
- - - - Other:
8419.90.9520 - - - - - Of apparatus of a type used in restaurants, hotels or similar locations X
8419.90.9540 - - - - - Of medical, surgical or laboratory sterilizers X
8419.90.9550 - - - - - Other X
84.20 - Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof:
8420.10 - - Calendering or other rolling machines:
8420.10.1000 - - - Textile calendering or rolling machines No.
8420.10.2000 - - - Calendering or similar rolling machines for making paper pulp, paper or paperboard No.
- - - Other:
8420.10.9040 - - - - Calendering or other rolling machines for rubber and plastics No.
8420.10.9080 - - - - Other No.
- - Parts:
8420.91.0000 - - - Cylinders No.
8420.99.0000 - - - Other X
84.21 - Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases; parts thereof:
- - Centrifuges, including centrifugal dryers:
8421.11.0000 - - - Cream separators No.
8421.12.0000 - - - Clothes dryers No.
8421.19.0000 - - - Other No.
- - Filtering or purifying machinery and apparatus for liquids:
8421.21.0000 - - - For filtering or purifying water No.
8421.22.0000 - - - For filtering or purifying beverages other than water No.
8421.23.0000 - - - Oil or fuel filters for internal combustion engines X
8421.29 - - - Other:
8421.29.0005 - - - - Refrigerant recovery and recycling units No.
- - - - Other:
8421.29.0015 - - - - - Oil-separation equipment No.
- - - - - Other:
8421.29.0040 - - - - - - Hydraulic fluid power filters rated at 1,000 kPa or greater No.
8421.29.0065 - - - - - - Other No.
- - Filtering or purifying machinery and apparatus for gases:
8421.31.0000 - - - Intake air filters for internal combustion engines X
8421.39 - - - Other:
8421.39.4000 - - - - Catalytic converters No.
- - - - Other:
- - - - - Dust collection and air purification equipment:
8421.39.8005 - - - - - - For machine tools of heading 8456 through 8465, inclusive X
8421.39.8015 - - - - - - Other X
- - - - - Other:
- - - - - - Industrial gas cleaning equipment:
8421.39.8020 - - - - - - - Electrostatic precipitators No.
8421.39.8030 - - - - - - - Other No.
8421.39.8040 - - - - - - Gas separation equipment No.
- - - - - - Other:
8421.39.8060 - - - - - - - Pneumatic fluid power filters, rated at 550 kPa or greater No.
8421.39.8090 - - - - - - - Other X
- - Parts:
8421.91.0000 - - - Of centrifuges, including centrifugal dryers X
8421.99 - - - Other:
8421.99.0040 - - - - Parts for machinery and apparatus for filtering or purifying water X
8421.99.0080 - - - - Other X
84.22 - Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers;
- - Dishwashing machines:
8422.11.0000 - - - Of the household type No.
8422.19.0000 - - - Other No.
8422.20.0000 - - Machinery for cleaning or drying bottles or other containers No.
8422.30 - - Machinery for filling, closing, sealing, or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages:
8422.30.1100 - - - Can-sealing machines No.
- - - Other:
8422.30.9110 - - - - Machines for aerating beverages No.
8422.30.9120 - - - - Labeling machines No.
- - - - Other:
- - - - - Machinery for filling, closing, sealing, capsuling or labeling bottles, cans or similar containers:
- - - - - - Machines for filling, whether or not capable of performing other operations:
8422.30.9130 - - - - - - - Vacuum or gas packaging No.
8422.30.9140 - - - - - - - Other No.
- - - - - - Machines which perform only the following operations: capping, lidding, sealing or closing:
8422.30.9150 - - - - - - - Vacuum or gas packaging No.
8422.30.9160 - - - - - - - Other No.
8422.30.9170 - - - - - - Other No.
- - - - - Machinery for filling, closing, sealing, capsuling or labeling boxes, bags or similar containers:
8422.30.9180 - - - - - - Machines for opening, filling and closing bags No.
8422.30.9190 - - - - - - Other No.
8422.40.0002 - - Other packing or wrapping machinery (including heat-shrink wrapping machinery) No.
8422.90 - - Parts:
- - - Of dishwashing machines:
8422.90.0540 - - - - Of the household type X
8422.90.0580 - - - - Other X
8422.90.9502 - - - Other X
84.23 - Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds; parts of weighing machinery:
8423.10 - - Personal weighing machines, including baby scales; household scales:
8423.10.0010 - - - Digital electronic type No.
8423.10.0050 - - - Other No.
8423.20.0000 - - Scales for continuous weighing of goods on conveyors No.
8423.30.0000 - - Constant-weight scales and scales for discharging a pre- determined weight of material into a bag or container, including hopper scales No.
- - Other weighing machinery:
8423.81 - - - Having a maximum weighing capacity not exceeding 30 kg:
- - - - Digital electronic type:
8423.81.0010 - - - - - Counting scales No.
8423.81.0020 - - - - - Retail scales, non-computing No.
8423.81.0030 - - - - - Retail scales, computing No.
8423.81.0040 - - - - - Other No.
8423.81.0050 - - - - Other No.
8423.82.0000 - - - Having a maximum weighing capacity exceeding 30 kg but not exceeding 5,000 kg No.
8423.89.0000 - - - Other No.
8423.90 - - Weighing machine weights of all kinds; parts of weighing machinery:
8423.90.0040 - - - Digital weight indicators No.
8423.90.0080 - - - Other X
84.24 - Mechanical appliances (whether or not hand operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting mac
8424.10.0000 - - Fire extinguishers, whether or not charged No.
8424.20.0000 - - Spray guns and similar appliances X
8424.30 - - Steam or sand blasting machines and similar jet projecting machines:
8424.30.1000 - - - Sand blasting machines No.
8424.30.9000 - - - Other X
- - Other appliances:
8424.81 - - - Agricultural or horticultural:
8424.81.1000 - - - - Sprayers (except sprayers, self-contained, having a capacity not over 20 liters (5.2 gals.)) X
- - - - Other:
- - - - - Irrigation equipment:
8424.81.9010 - - - - - - Self-propelled, center pivot No.
8424.81.9020 - - - - - - Other (including lateral move) No.
- - - - - Other:
8424.81.9040 - - - - - - Sprayers, self-contained, having a capacity not over 20 liters No.
8424.81.9090 - - - - - - Other No.
8424.89.0000 - - - Other No.
8424.90 - - Parts:
8424.90.2000 - - - Of sand blasting machines X
- - - Other:
8424.90.9040 - - - - Of steam and similar jet projecting machines X
8424.90.9500 - - - - Other X
84.25 - Pulley tackle and hoists other than skip hoists; winches and capstans; jacks:
- - Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles:
8425.11.0000 - - - Powered by electric motor No.
8425.19.0000 - - - Other No.
- - Winches; capstans:
8425.31.0100 - - - Powered by electric motor No.
8425.39.0100 - - - Other No.
- - Jacks; hoists of a kind used for raising vehicles:
8425.41.0000 - - - Built-in jacking systems of a type used in garages No.
8425.42.0000 - - - Other jacks and hoists, hydraulic No.
8425.49.0000 - - - Other No.
84.26 - Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane:
- - Overhead traveling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers:
8426.11.0000 - - - Overhead traveling cranes on fixed support No.
8426.12.0000 - - - Mobile lifting frames on tires and straddle carriers No.
8426.19.0000 - - - Other No.
8426.20.0000 - - Tower cranes No.
8426.30.0000 - - Portal or pedestal jib cranes No.
- - Other machinery, self-propelled:
8426.41 - - - On tires:
8426.41.0005 - - - - Works trucks fitted with a crane No.
- - - - Other:
8426.41.0010 - - - - - Cable operated No.
8426.41.0090 - - - - - Other No.
8426.49 - - - Other:
8426.49.0010 - - - - Cable operated No.
8426.49.0090 - - - - Other No.
- - Other machinery:
8426.91.0000 - - - Designed for mounting on road vehicles No.
8426.99.0000 - - - Other No.
84.27 - Fork-lift trucks; other works trucks fitted with lifting or handling equipment:
8427.10 - - Self-propelled trucks powered by an electric motor:
8427.10.4000 - - - Rider-type, counterbalanced fork-lift trucks No.
- - - Other:
8427.10.8010 - - - - Operator riding No.
8427.10.8060 - - - - Automated guided vehicle (AGV) No.
8427.10.8090 - - - - Other No.
8427.20 - - Other self-propelled trucks:
8427.20.4000 - - - Rider-type, counterbalanced fork-lift trucks No.
- - - Other:
8427.20.8020 - - - - Aerial work platforms No.
8427.20.8040 - - - - Other No.
8427.90 - - Other trucks:
8427.90.0020 - - - Aerial work platforms No.
8427.90.0040 - - - Other No.
84.28 - Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics):
8428.10.0000 - - Passenger or freight elevators other than continuous action; skip hoists No.
8428.20 - - Pneumatic elevators and conveyors:
8428.20.0010 - - - Conveyors No.
8428.20.0050 - - - Elevators No.
- - Other continuous-action elevators and conveyors, for goods or materials:
8428.31.0000 - - - Specially designed for underground use No.
8428.32.0000 - - - Other, bucket type No.
8428.33.0000 - - - Other, belt type No.
8428.39.0000 - - - Other No.
8428.40.0000 - - Escalators and moving walkways No.
8428.60.0000 - - Teleferics, chair lifts, ski draglines; traction mechanisms for funiculars No.
8428.90 - - Other machinery:
8428.90.0210 - - - Woodland log handling equipment (other than skidders) No.
8428.90.0220 - - - Industrial robots No.
8428.90.0290 - - - Other No.
84.29 - Self-propelled bulldozers, angledozers, graders, levelers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:
- - Bulldozers and angledozers:
8429.11 - - - Track laying:
8429.11.0010 - - - - New No.
8429.11.0090 - - - - Used or rebuilt No.
8429.19 - - - Other:
8429.19.0010 - - - - New No.
8429.19.0090 - - - - Used or rebuilt No.
8429.20.0000 - - Graders and levelers No.
8429.30 - - Scrapers:
- - - New:
8429.30.0020 - - - - Not exceeding 13.7 m3 (18 cu. yds.) No.
8429.30.0040 - - - - Exceeding 13.7 m3 (18 cu. yds) No.
8429.30.0060 - - - Used or rebuilt No.
8429.40 - - Tamping machines and road rollers:
- - - New:
8429.40.0020 - - - - Vibratory No.
8429.40.0040 - - - - Other (nonvibratory) No.
8429.40.0060 - - - Used or rebuilt No.
- - Mechanical shovels, excavators and shovel loaders:
8429.51 - - - Front-end shovel loaders:
- - - - Wheel type:
- - - - - New:
- - - - - - Integral tractor shovel loaders, rear engine mounted:
8429.51.1005 - - - - - - - 2 wheel drive No.
- - - - - - - 4 wheel drive with a bucket capacity of:
8429.51.1015 - - - - - - - - Under 1.5 m3 (2 cu. yds) No.
8429.51.1025 - - - - - - - - At least 1.5 m3 (2 cu. yds.) but under 2.2 m3 (2 cu. yds) No.
8429.51.1030 - - - - - - - - At least 2.2 m3 (2 cu. yds.) but under 2.9 m3 (3 cu. yds.) No.
8429.51.1035 - - - - - - - - At least 2.9 m3 (3 cu. yds.) but under 3.8 m3 (5 cu. yds.) No.
8429.51.1040 - - - - - - - - At least 3.8 m3 (5 cu. yds.) but under 5.2 m3 (6 cu. yds.) No.
8429.51.1045 - - - - - - - - At least 5.2 m3 (6 cu. yds.) but under 7.6 m3 (10 cu. yds.) No.
8429.51.1050 - - - - - - - - At least 7.6 m3 (10 cu. yds.) but under 11.4 m3 (15 cu. yds.) No.
8429.51.1055 - - - - - - - - 11.4 m3 (15 cu. yds.) and over No.
8429.51.1060 - - - - - - Other No.
8429.51.1065 - - - - - Used or rebuilt No.
- - - - Other:
- - - - - New:
8429.51.5010 - - - - - - Less than 44.7 kW (60 net engine hp) No.
8429.51.5020 - - - - - - At least 44.7 kW (60 net engine hp) but under 67.1 kW (90 net engine hp) No.
8429.51.5030 - - - - - - At least 67.1 kW (90 net engine hp) but under 93.2 kW (125 net engine hp) No.
8429.51.5040 - - - - - - At least 93.2 kW (125 net engine hp) but under 119.3 kW (160 net engine hp) No.
8429.51.5050 - - - - - - 119.3 kW (160 net engine hp) and over No.
8429.51.5060 - - - - - Used or rebuilt No.
8429.52 - - - Machinery with a 360 revolving superstructure:
- - - - Backhoes, shovels, clamshells, and draglines:
- - - - - New:
- - - - - - Crawler mounted:
8429.52.1010 - - - - - - - Hydraulic No.
8429.52.1020 - - - - - - - Other (including cable operated) No.
- - - - - - Other (except truck mounted of chapter 87):
8429.52.1030 - - - - - - - Hydraulic No.
8429.52.1040 - - - - - - - Other (including cable operated) No.
8429.52.1050 - - - - - Used or rebuilt No.
- - - - Other:
8429.52.5010 - - - - - New No.
8429.52.5090 - - - - - Used or rebuilt No.
8429.59 - - - Other:
- - - - Backhoes, shovels, clamshells and draglines:
- - - - - New:
8429.59.1030 - - - - - - Backhoes No.
8429.59.1060 - - - - - - Other No.
8429.59.1090 - - - - - Used or rebuilt No.
- - - - Other:
- - - - - New:
- - - - - - Ditchers and trenchers (self-propelled):
8429.59.5020 - - - - - - - Ladder type No.
8429.59.5040 - - - - - - - Other No.
8429.59.5060 - - - - - - Other No.
8429.59.5080 - - - - - Used or rebuilt No.
84.30 - Other moving, grading, leveling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snowplows and snowblowers:
8430.10.0000 - - Pile-drivers and pile-extractors No.
8430.20 - - Snowplows and snowblowers:
- - - Snowblowers (throwers):
8430.20.0030 - - - - Attachment type No.
8430.20.0060 - - - - Other No.
8430.20.0090 - - - Other No.
- - Coal or rock cutters and tunneling machinery:
8430.31.0000 - - - Self-propelled No.
8430.39.0000 - - - Other No.
- - Other boring or sinking machinery:
8430.41.0000 - - - Self-propelled No.
8430.49 - - - Other:
8430.49.4000 - - - - Offshore oil and natural gas drilling and production platforms kg
- - - - Other:
- - - - - For oil and gas field drilling:
8430.49.8010 - - - - - - Rotary No.
8430.49.8020 - - - - - - Other No.
- - - - - - For water well drilling:
8430.49.8030 - - - - - - - Rotary No.
8430.49.8040 - - - - - - - Other No.
8430.49.8050 - - - - - - Other (including percussion type rock drills) No.
8430.50.0000 - - Other machinery, self-propelled No.
- - Other machinery, not self-propelled:
8430.61.0000 - - - Tamping or compacting machinery No.
8430.69.0100 - - - Other No.
84.31 - Parts suitable for use solely or principally with the machinery of headings 8425 to 8430:
8431.10 - - Of machinery of heading 8425:
8431.10.0010 - - - Of machinery of subheading 8425.11 or 8425.19 X
8431.10.0090 - - - Other X
8431.20.0000 - - Of machinery of heading 8427 X
- - Of machinery of heading 8428:
8431.31 - - - Of passenger or freight elevators other than continuous action, skip hoists or escalators:
8431.31.0020 - - - - Of skip hoists X
8431.31.0040 - - - - Of escalators X
8431.31.0060 - - - - Other X
8431.39 - - - Other:
8431.39.0010 - - - - Of elevators and conveyors X
- - - - Other:
8431.39.0050 - - - - - Of oil and gas field machinery X
8431.39.0090 - - - - - Other X
- - Of machinery of heading 8426, 8429 or 8430:
8431.41 - - - Buckets, shovels, grabs and grips:
8431.41.0020 - - - - Shovel attachments No.
8431.41.0040 - - - - Clamshell (grapple) attachments No.
8431.41.0060 - - - - Dragline buckets No.
8431.41.0080 - - - - Other No.
8431.42.0000 - - - Bulldozer or angledozer blades No.
8431.43 - - - Parts for boring or sinking machinery of subheading 8430.41 or 8430.49:
8431.43.4000 - - - - Of offshore oil and natural gas drilling and production platforms X
- - - - Other:
8431.43.8010 - - - - - Of oil and gas field machinery X
8431.43.8090 - - - - - Of other boring or sinking machinery X
8431.49 - - - Other:
- - - - Of machinery of heading 8426:
8431.49.1010 - - - - - Of machinery of subheading 8426.11, 8426.19 and 8426.30 X
8431.49.1060 - - - - - Of mobile lifting frames, straddle carriers, and works trucks fitted with a crane X
8431.49.1090 - - - - - Other X
- - - - Attachments for mounting on machinery:
8431.49.9005 - - - - - Backhoe attachments No.
8431.49.9010 - - - - - Front-end loader attachments No.
8431.49.9015 - - - - - Rippers and rooters No.
8431.49.9020 - - - - - Other No.
- - - - Other:
8431.49.9027 - - - - - Parts of coal or rock cutters and tunneling machinery X
8431.49.9037 - - - - - Parts of backhoes, shovels, clamshells and draglines X
- - - - - Other:
8431.49.9045 - - - - - - Scraper bowls for scrapers of subheading 8429.30 and 8430.69 No.
8431.49.9057 - - - - - - Other X
84.32 - Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers; parts thereof:
8432.10 - - Plows:
8432.10.0020 - - - Moldboard plows except listers No.
8432.10.0040 - - - Disc plows No.
8432.10.0060 - - - Other No.
- - Harrows, scarifiers, cultivators, weeders and hoes:
8432.21.0000 - - - Disc harrows No.
8432.29 - - - Other:
- - - - Cultivators, weeders and hoes:
8432.29.0040 - - - - - Cultivators, tractor drawn or for tractor mounting No.
8432.29.0060 - - - - - Walk behind rotary tillers No.
8432.29.0080 - - - - - Other No.
8432.29.0090 - - - - Other No.
8432.30 - - Seeders, planters and transplanters:
8432.30.0010 - - - Planters and transplanters No.
8432.30.0090 - - - Seeders (including drills) No.
8432.40.0000 - - Manure spreaders and fertilizer distributors No.
8432.80.0000 - - Other machinery No.
8432.90 - - Parts:
8432.90.0005 - - - Of plows X
8432.90.0015 - - - Of harrows, scarifiers, cultivators, weeders and hoes X
8432.90.0030 - - - Of seeders, planters, transplanters, manure spreaders and fertilizer distributors X
8432.90.0080 - - - Of other machinery X
84.33 - Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof:
- - Mowers for lawns, parks or sports grounds:
8433.11 - - - Powered, with the cutting device rotating in a horizontal plane:
8433.11.0010 - - - - Electric mowers, including battery operated No.
- - - - Riding mowers, other than electric:
8433.11.0020 - - - - - Under 5.2 kW (7 hp) No.
8433.11.0030 - - - - - 5.2 kW (7 hp) and over but under 7.46 kW (10 hp) No.
8433.11.0040 - - - - - 7.46 kW (10 hp) and over No.
- - - - Other:
8433.11.0050 - - - - - Under 3.7 kW (5 hp) No.
8433.11.0060 - - - - - 3.7 kW (5 hp) and over No.
8433.19 - - - Other:
8433.19.0010 - - - - Greens mowers No.
8433.19.0020 - - - - Gang cutting units No.
8433.19.0030 - - - - Other riding mowers No.
- - - - Other:
8433.19.0040 - - - - - Gasoline powered No.
8433.19.0050 - - - - - Other No.
8433.20 - - Other mowers, including cutter bars for tractor mounting:
- - - Tractor drawn or for tractor mounting:
8433.20.0020 - - - - Rotary cutter type No.
8433.20.0040 - - - - Other (including cutter bar type) No.
8433.20.0060 - - - Other No.
8433.30.0000 - - Other haymaking machinery No.
8433.40.0000 - - Straw or fodder balers, including pick-up balers No.
- - Other harvesting machinery; threshing machinery:
8433.51 - - - Combine harvester-threshers:
8433.51.0010 - - - - Self-propelled No.
8433.51.0090 - - - - Other No.
8433.52.0000 - - - Other threshing machinery No.
8433.53.0000 - - - Root or tuber harvesting machines No.
8433.59 - - - Other:
8433.59.0010 - - - - Field forage harvesters No.
8433.59.0090 - - - - Other No.
8433.60 - - Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce:
8433.60.0010 - - - Machines for cleaning, sorting or grading eggs No.
8433.60.0090 - - - Other No.
8433.90 - - Parts:
8433.90.1000 - - - Of mowers for lawns, parks or sports grounds X
- - - Other:
- - - - Of other mowers, harvesting machines and threshing machines:
8433.90.5020 - - - - - Of haying machines and balers X
8433.90.5040 - - - - - Other X
8433.90.5060 - - - - Of machines for cleaning, sorting, or grading eggs X
8433.90.5080 - - - - Of machines for cleaning, sorting or grading fruit or other agricultural produce X
84.34 - Milking machines and dairy machinery, and parts thereof:
8434.10.0000 - - Milking machines No.
8434.20.0000 - - Dairy machinery No.
8434.90.0000 - - Parts X
84.35 - Presses, crushers and similar machinery, used in the manufact- ure of wine, cider, fruit juices or similar beverages; parts thereof:
8435.10.0000 - - Machinery No.
8435.90.0000 - - Parts X
84.36 - Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with brooders; parts thereof:
8436.10.0000 - - Machinery for preparing animal feeds No.
- - Poultry-keeping machinery; poultry incubators and brooders:
8436.21.0000 - - - Poultry incubators and brooders No.
8436.29.0000 - - - Other No.
8436.80 - - Other machinery:
8436.80.0020 - - - Forestry machinery No.
- - - Other:
8436.80.0040 - - - - Barn and barnyard machinery (including mechanized hog and cattle feeding and watering equipment) No.
8436.80.0060 - - - - Machinery for preparing crops for market or for use No.
8436.80.0080 - - - - Other No.
- - Parts:
8436.91.0000 - - - Of poultry-keeping machinery or poultry incubators and brooders X
8436.99 - - - Other:
8436.99.0020 - - - - Of forestry machinery X
- - - - Other:
8436.99.0040 - - - - - Of barn and barnyard machines (including mechanized hog and cattle feeding and watering equipment) X
8436.99.0060 - - - - - Of machines for preparing crops for market or for use (including machines of subheading 8436.10) X
8436.99.0080 - - - - - Other X
84.37 - Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the leguminous vegetables, other than farm type machinery; parts thereof:
8437.10.0000 - - Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables No.
8437.80.0000 - - Other machinery No.
8437.90.0000 - - Parts X
84.38 - Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils; parts thereof:
8438.10.0000 - - Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products No.
8438.20.0000 - - Machinery for the manufacture of confectionery, cocoa or chocolate No.
8438.30.0000 - - Machinery for sugar manufacture No.
8438.40.0000 - - Brewery machinery No.
8438.50 - - Machinery for the preparation of meat or poultry:
8438.50.0010 - - - Meat- and poultry- packing plant machinery No.
8438.50.0090 - - - Other No.
8438.60.0000 - - Machinery for the preparation of fruits, nuts or vegetables No.
8438.80.0000 - - Other machinery No.
8438.90.0000 - - Parts X
84.39 - Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard (other than the machinery of heading 8419); parts thereof:
8439.10 - - Machinery for making pulp of fibrous cellulosic material:
8439.10.0010 - - - New No.
8439.10.0090 - - - Used or rebuilt No.
8439.20 - - Machinery for making paper or paperboard:
8439.20.0010 - - - New No.
8439.20.0090 - - - Used or rebuilt No.
8439.30.0000 - - Machinery for finishing paper or paperboard No.
- - Parts:
8439.91.0000 - - - Of machinery for making pulp of fibrous cellulosic material X
8439.99 - - - Other:
8439.99.1000 - - - - Of machinery for making paper or paperboard X
8439.99.5000 - - - - Of machinery for finishing paper or paperboard X
84.40 - Bookbinding machinery, including book-sewing machines, and parts thereof:
8440.10.0000 - - Machinery No.
8440.90.0000 - - Parts X
84.41 - Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds, and parts thereof:
8441.10.0000 - - Cutting machines No.
8441.20.0000 - - Machines for making bags, sacks or envelopes No.
8441.30.0000 - - Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding No.
8441.40.0000 - - Machines for molding articles in paper pulp, paper or paperboard No.
8441.80.0000 - - Other machinery No.
8441.90.0000 - - Parts X
84.42 - Machinery, apparatus and equipment (other than the machine- tools of headings 8456 to 8465) for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stone
8442.30 - - Machinery, apparatus and equipment:
8442.30.0110 - - - Phototypesetting and composing machines No.
8442.30.0150 - - - Other machinery, apparatus and equipment No.
8442.40.0000 - - Parts of the foregoing machinery, apparatus or equipment X
8442.50 - - Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished):
8442.50.5000 - - - Planed, grained, polished or otherwise prepared for engraving or impressing X
8442.50.8000 - - - Other X
84.43 - Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof:
- - Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442:
8443.11.0000 - - - Offset printing machinery, reel-fed No.
8443.12.0000 - - - Offset printing machinery, sheet-fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state) No.
8443.13.0000 - - - Other offset printing machinery No.
8443.14.0000 - - - Letterpress printing machinery, reel fed, excluding flexographic printing No.
8443.15.0000 - - - Letterpress printing machinery, other than reel fed, excluding flexographic printing No.
8443.16.0000 - - - Flexographic printing machinery No.
8443.17.0000 - - - Gravure printing machinery No.
8443.19 - - - Other:
8443.19.2000 - - - - Textile printing machinery X
8443.19.3000 - - - - Other X
- - Other printers, copying machines and facsimile machines, whether or not combined:
8443.31.0000 - - - Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network No.
8443.32 - - - Other, capable of connecting to an automatic data processing machine or to a network:
- - - - Printer units:
- - - - - Laser:
8443.32.1010 - - - - - - Capable of producing more than 20 pages per minute No.
8443.32.1020 - - - - - - Other No.
8443.32.1030 - - - - - Light bar electronic type No.
8443.32.1040 - - - - - Ink jet No.
8443.32.1050 - - - - - Thermal transfer No.
8443.32.1060 - - - - - Ionographic No.
8443.32.1070 - - - - - Daisy wheel No.
8443.32.1080 - - - - - Dot matrix No.
8443.32.1090 - - - - - Other No.
8443.32.5000 - - - - Other X
8443.39 - - - Other:
- - - - Copying machines:
- - - - - Electrostatic photocopying apparatus:
8443.39.1000 - - - - - - Operating by reproducing the original image directly onto the copy (direct process) No.
8443.39.2000 - - - - - - Operating by reproducing the original image via an intermediate onto the copy (indirect process) No.
- - - - - Other photocopying apparatus:
8443.39.3000 - - - - - - Incorporating an optical system No.
8443.39.4000 - - - - - - Of the contact type No.
8443.39.5000 - - - - - Thermocopying apparatus No.
8443.39.6000 - - - - - Other No.
8443.39.9000 - - - - Other No.
- - Parts and accessories:
8443.91 - - - Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442:
8443.91.1000 - - - - Machines for uses ancillary to printing X
8443.91.2000 - - - - Parts for textile printing machinery X
8443.91.3000 - - - - Other X
8443.99 - - - Other:
8443.99.1000 - - - - Accessory and auxiliary machines which are intended for attachment to an electrostatic photocopier and which do not operate independently of such photocopier No.
- - - - Parts and accessories for the goods of subheading 8443.31 or of printer units of subheading 8443.32.10:
8443.99.2210 - - - - - Ink cartridges No.
8443.99.2250 - - - - - Other X
8443.99.4100 - - - - Parts and accessories of copying machines X
8443.99.5600 - - - - Other X
84.44 - Machines for extruding, drawing, texturing or cutting manmade textile materials:
8444.00.0010 - - Texturing machines No.
8444.00.0090 - - Other No.
84.45 - Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines
- - Machines for preparing textile fibers:
8445.11.0000 - - - Carding machines No.
8445.12.0000 - - - Combing machines No.
8445.13.0000 - - - Drawing or roving machines No.
8445.19 - - - Other:
8445.19.0040 - - - - Cotton gins No.
8445.19.0080 - - - - Other No.
8445.20.0000 - - Textile spinning machines No.
8445.30 - - Textile doubling or twisting machines:
8445.30.0010 - - - Textile twisting machines No.
8445.30.0090 - - - Other No.
8445.40.0000 - - Textile winding (including weft winding) or reeling machines No.
8445.90.0000 - - Other No.
84.46 - Weaving machines (looms):
8446.10 - - For weaving fabrics of a width not exceeding 30 cm:
8446.10.0010 - - - Power looms No.
8446.10.0090 - - - Other No.
- - For weaving fabrics of a width exceeding 30 cm (11.7 inches), shuttle type:
8446.21.0000 - - - Power looms No.
8446.29.0000 - - - Other No.
8446.30.0000 - - For weaving fabrics of a width exceeding 30 cm, shuttleless type No.
84.47 - Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting:
- - Circular knitting machines:
8447.11 - - - With cylinder diameter not exceeding 165 mm:
8447.11.1000 - - - - For knitting hosiery No.
8447.11.9000 - - - - Other No.
- - Circular knitting machines:
8447.12 - - - With cylinder diameter exceeding 165 mm:
8447.12.1000 - - - - For knitting hosiery No.
8447.12.9000 - - - - Other No.
8447.20.0000 - - Flat knitting machines; stitch-bonding machines No.
8447.90.0000 - - Other No.
84.48 - Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of th
- - Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447:
8448.11.0000 - - - Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith X
8448.19.0000 - - - Other X
8448.20 - - Parts and accessories of machines of heading 8444 or of their auxiliary machinery:
8448.20.1000 - - - Of machines for extruding or drawing manmade textile filaments X
- - - Other:
8448.20.5010 - - - - Of texturing machines X
8448.20.5090 - - - - Other X
- - Parts and accessories of machines of heading 8445 or of their auxiliary machinery:
8448.31.0000 - - - Card clothing m2
8448.32 - - - Of machines for preparing textile fibers, other than card clothing:
8448.32.0010 - - - - Of cotton gins X
8448.32.0090 - - - - Other X
8448.33.0000 - - - Spindles, spindle flyers, spinning rings and ring travellers X
8448.39 - - - Other:
8448.39.1000 - - - - Parts of spinning, doubling or twisting machines X
8448.39.5000 - - - - Parts of winding or reeling machines X
8448.39.9000 - - - - Other X
- - Parts and accessories of weaving machines (looms) or of their auxiliary machinery:
8448.42.0000 - - - Reeds for looms, healds and heald-frames X
8448.49 - - - Other:
8448.49.1000 - - - - Shuttles X
8448.49.2000 - - - - Other X
- - Parts and accessories of machines of heading 8447 or of their auxiliary machinery:
8448.51 - - - Sinkers, needles and other articles used in forming stitches:
8448.51.4000 - - - - Needles for knitting machines Thsnds
8448.51.5000 - - - - Other X
8448.59 - - - Other:
8448.59.1000 - - - - Parts of knitting machines X
8448.59.5000 - - - - Other X
8449.00.0000 - Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof X
84.50 - Household- or laundry-type washing machines, including machines which both wash and dry; parts thereof:
- - Machines, each of a dry linen capacity not exceeding 10 kg:
8450.11 - - - Fully automatic machines:
8450.11.0010 - - - - Coin operated No.
8450.11.0090 - - - - Other No.
8450.12.0000 - - - Other machines with built-in centrifugal dryer No.
8450.19.0000 - - - Other No.
8450.20 - - Machines, each of a dry linen capacity exceeding 10 kg:
8450.20.0010 - - - Coin operated No.
8450.20.0090 - - - Other No.
8450.90.0000 - - Parts X
84.51 - Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing finishing, coating or impregnating textile yarns, fabrics or made up textile articles and
8451.10.0000 - - Dry-cleaning machines No.
- - Drying machines (except centrifugal type of heading 8421):
8451.21 - - - Each of a dry linen capacity not exceeding 10 kg:
8451.21.0010 - - - - Coin operated No.
8451.21.0090 - - - - Other No.
8451.29 - - - Other:
8451.29.0010 - - - - For drying made up articles No.
8451.29.0090 - - - - Other No.
8451.30.0000 - - Ironing machines and presses (including fusing presses) No.
8451.40.0000 - - Washing, bleaching or dyeing machines No.
8451.50.0000 - - Machines for reeling, unreeling, folding, cutting or pinking textile fabrics No.
8451.80.0000 - - Other machinery No.
8451.90 - - Parts:
8451.90.0010 - - - Of machines for washing, dry-cleaning, ironing, pressing or drying made up textile articles or of other household or laundry type machines X
- - - Other:
8451.90.0020 - - - - Of machines for bleaching, dyeing, washing or cleaning X
8451.90.0090 - - - - Other X
84.52 - Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof:
8452.10.0000 - - Sewing machines of the household type No.
- - Other sewing machines:
8452.21.0000 - - - Automatic units No.
8452.29.0000 - - - Other No.
8452.30.0000 - - Sewing machine needles Thsnds
8452.90 - - Furniture, bases and covers for sewing machines, and parts thereof; other parts of sewing machines:
8452.90.1000 - - - Furniture, bases and covers for sewing machines, and parts thereof X
- - - Other parts of sewing machines:
8452.90.2010 - - - - Of household machines X
8452.90.2090 - - - - Other X
84.53 - Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof:
8453.10.0000 - - Machinery for preparing, tanning or working hides, skins or leather No.
8453.20.0000 - - Machinery for making or repairing footwear No.
8453.80.0000 - - Other machinery No.
8453.90.0000 - - Parts X
84.54 - Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof:
8454.10.0000 - - Converters No.
8454.20 - - Ingot molds and ladles:
8454.20.0010 - - - Ingot molds for steel ingots No. kg
8454.20.0090 - - - Other kg
8454.30 - - Casting machines:
8454.30.0010 - - - Die casting machines No.
8454.30.0090 - - - Other No.
8454.90 - - Parts:
- - - Of casting machines:
8454.90.0030 - - - - Of die casting machines X
8454.90.0060 - - - - Other X
8454.90.0090 - - - Other X
84.55 - Metal-rolling mills and rolls therefor; parts thereof:
8455.10.0000 - - Tube mills No.
- - Other rolling mills:
8455.21.0000 - - - Hot or combination hot and cold No.
8455.22.0000 - - - Cold No.
8455.30 - - Rolls for rolling mills:
8455.30.0010 - - - Gray iron kg
8455.30.0050 - - - Cast steel kg
8455.30.0090 - - - Other kg
8455.90.0000 - - Other parts kg
84.56 - Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro- discharge, electro-chemical, electron-beam, ionic-beam or plasma arc processes; water-jet cutting machines:
8456.10.0002 - - Operated by laser or other light or photon beam processes No.
8456.20.0000 - - Operated by ultrasonic processes No.
8456.30.0000 - - Operated by electro-discharge processes No.
8456.90 - - Other:
8456.90.3000 - - - For working metal No.
8456.90.7002 - - - Other No.
84.57 - Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal:
8457.10 - - Machining centers:
8457.10.0005 - - - Used or rebuilt No.
- - - Other:
- - - - With automatic tool changers:
- - - - - Vertical-spindle machines with a Y-axis travel of:
8457.10.0015 - - - - - - Not over 660 mm (26 inches) No.
8457.10.0025 - - - - - - Over 660 mm (26 inches) No.
8457.10.0036 - - - - - Horizontal machining centers with ATC No.
8457.10.0039 - - - - - Other No.
8457.10.0045 - - - - Other, including indexing turrets and universal indexing heads No.
8457.20 - - Unit construction machines (single station):
8457.20.0010 - - - Numerically controlled No.
8457.20.0090 - - - Other No.
8457.30 - - Multistation transfer machines:
8457.30.0010 - - - Numerically controlled No.
8457.30.0090 - - - Other No.
84.58 - Lathes (including turning centers) for removing metal:
- - Horizontal lathes:
8458.11 - - - Numerically controlled:
8458.11.0005 - - - - Used or rebuilt No.
- - - - Other:
8458.11.0010 - - - - - Multiple spindle No.
- - - - - Other:
8458.11.0030 - - - - - - With a power rating of less than 18.65 kW (25 hp) No.
8458.11.0050 - - - - - - With a power rating of 18.65 kW (25 hp) or greater but not exceeding 37.3 kW (50 hp) No.
8458.11.0090 - - - - - - With a power rating exceeding 37.3 kW (50 hp) No.
8458.19 - - - Other:
8458.19.0010 - - - - Used or rebuilt No.
8458.19.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8458.19.0030 - - - - - Engine or toolroom lathes No.
- - - - - Automatic bar and/or chucking machines:
8458.19.0050 - - - - - - Single spindle No.
8458.19.0070 - - - - - - Multiple spindle No.
8458.19.0090 - - - - - Other No.
- - Other lathes (including vertical):
8458.91 - - - Numerically controlled:
- - - - Vertical turret lathes:
8458.91.1040 - - - - - Used or rebuilt No.
- - - - - Other:
8458.91.1060 - - - - - - Multiple spindle No.
8458.91.1080 - - - - - - Other No.
- - - - Other:
8458.91.5040 - - - - - Used or rebuilt No.
- - - - - Other:
8458.91.5050 - - - - - - Multiple spindle No.
8458.91.5070 - - - - - - Other No.
8458.99 - - - Other:
- - - - Vertical turret lathes:
8458.99.1010 - - - - - Used or rebuilt No.
8458.99.1050 - - - - - Other No.
- - - - Other:
8458.99.5030 - - - - - Used or rebuilt No.
8458.99.5060 - - - - - Other, valued under $3,025 each No.
8458.99.5090 - - - - - Other No.
84.59 - Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458:
8459.10.0000 - - Way-type unit head machines No.
- - Other drilling machines:
8459.21 - - - Numerically controlled:
8459.21.0040 - - - - Used or rebuilt No.
8459.21.0080 - - - - Other No.
8459.29 - - - Other:
8459.29.0010 - - - - Used or rebuilt No.
8459.29.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8459.29.0040 - - - - - Multiple spindle No.
- - - - - Other (including single spindle):
8459.29.0050 - - - - - - Radial No.
8459.29.0070 - - - - - - Upright, excluding sensitive (hand-directed), turret, and deep-hole machines No.
8459.29.0090 - - - - - - Other No.
- - Other boring-milling machines:
8459.31 - - - Numerically controlled:
8459.31.0005 - - - - Used or rebuilt No.
- - - - Other:
- - - - - Horizontal spindle:
8459.31.0010 - - - - - - Table type, excluding planer type No.
8459.31.0040 - - - - - - Other No.
8459.31.0070 - - - - - Other No.
8459.39 - - - Other:
8459.39.0010 - - - - Used or rebuilt No.
8459.39.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8459.39.0040 - - - - - Horizontal spindle No.
8459.39.0050 - - - - - Other No.
8459.40 - - Other boring machines:
8459.40.0010 - - - Used or rebuilt No.
8459.40.0020 - - - Other, valued under $3,025 each No.
- - - Other:
- - - - Vertical:
8459.40.0040 - - - - - Numerically controlled No.
8459.40.0050 - - - - - Other No.
- - - - Other (including horizontal):
8459.40.0070 - - - - - Numerically controlled No.
8459.40.0080 - - - - - Other No.
- - Milling machines, knee type:
8459.51 - - - Numerically controlled:
8459.51.0040 - - - - Used or rebuilt No.
8459.51.0080 - - - - Other No.
8459.59 - - - Other:
8459.59.0010 - - - - Used or rebuilt No.
8459.59.0020 - - - - Other, valued under $3,025 each No.
8459.59.0030 - - - - Other No.
- - Other milling machines:
8459.61 - - - Numerically controlled:
8459.61.0040 - - - - Used or rebuilt No.
8459.61.0080 - - - - Other No.
8459.69 - - - Other:
8459.69.0010 - - - - Used or rebuilt No.
8459.69.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8459.69.0050 - - - - - Profile, duplicating, or die sinking No.
8459.69.0070 - - - - - Bed type No.
8459.69.0090 - - - - - Other No.
8459.70 - - Other threading or tapping machines:
8459.70.4000 - - - Numerically controlled No.
- - - Other:
8459.70.8040 - - - - Used or rebuilt No.
8459.70.8060 - - - - Other, valued under $3,025 each No.
8459.70.8080 - - - - Other No.
84.60 - Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal, or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of hea
- - Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm:
8460.11 - - - Numerically controlled:
8460.11.0040 - - - - Used or rebuilt No.
8460.11.0080 - - - - Other No.
8460.19 - - - Other:
8460.19.0005 - - - - Used or rebuilt No.
- - - - Other:
8460.19.0010 - - - - - Reciprocating-table type No.
8460.19.0050 - - - - - Other No.
- - Other grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm:
8460.21 - - - Numerically controlled:
8460.21.0040 - - - - Used or rebuilt No.
8460.21.0080 - - - - Other No.
8460.29 - - - Other:
8460.29.0005 - - - - Used or rebuilt No.
- - - - Other:
8460.29.0010 - - - - - External cylindrical, including universal No.
8460.29.0030 - - - - - Internal cylindrical No.
8460.29.0050 - - - - - Other No.
- - Sharpening (tool or cutter grinding) machines:
8460.31 - - - Numerically controlled:
8460.31.0040 - - - - Used or rebuilt No.
8460.31.0080 - - - - Other No.
8460.39 - - - Other:
8460.39.0010 - - - - Used or rebuilt No.
8460.39.0020 - - - - Other, valued under $3,025 each No.
8460.39.0050 - - - - Other No.
8460.40 - - Honing or lapping machines:
8460.40.0010 - - - Used or rebuilt No.
8460.40.0020 - - - Other, valued under $3,025 each No.
- - - Other:
8460.40.0060 - - - - Numerically controlled No.
8460.40.0080 - - - - Other No.
8460.90 - - Other:
8460.90.0010 - - - Used or rebuilt No.
8460.90.0020 - - - Other, valued under $3,025 each No.
- - - Other:
8460.90.0060 - - - - Numerically controlled No.
8460.90.0080 - - - - Other No.
84.61 - Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal, or cermets, not elsewhere specified or included:
8461.20 - - Shaping or slotting machines:
8461.20.4000 - - - Numerically controlled No.
- - - Other:
8461.20.8030 - - - - Used or rebuilt No.
8461.20.8070 - - - - Other, valued under $3,025 each No.
8461.20.8090 - - - - Other No.
8461.30 - - Broaching machines:
8461.30.0020 - - - Used or rebuilt No.
8461.30.0040 - - - Other, valued under $3,025 each No.
- - - Other:
8461.30.0060 - - - - Numerically controlled No.
8461.30.0080 - - - - Other No.
8461.40 - - Gear cutting, gear grinding or gear finishing machines:
- - - Gear cutting machines:
8461.40.1010 - - - - Used or rebuilt No.
- - - - Other:
8461.40.1050 - - - - - Gear hobbers No.
8461.40.1070 - - - - - Gear shapers No.
8461.40.1090 - - - - - Other No.
- - - Gear grinding or finishing machines:
8461.40.5020 - - - - Used or rebuilt No.
8461.40.5040 - - - - Other, valued under $3,025 each No.
8461.40.5060 - - - - Other No.
8461.50 - - Sawing or cutting-off machines:
8461.50.0010 - - - Used or rebuilt No.
8461.50.0020 - - - Other, valued under $3,025 each No.
- - - Other:
8461.50.0050 - - - - Numerically controlled No.
8461.50.0090 - - - - Other No.
8461.90 - - Other:
- - - Numerically controlled:
- - - - Planing machines:
8461.90.3020 - - - - - Used or rebuilt No.
8461.90.3040 - - - - - Other No.
- - - - Other:
8461.90.3060 - - - - - Used or rebuilt No.
8461.90.3080 - - - - - Other No.
- - - Other:
- - - - Planing machines:
8461.90.6010 - - - - - Used or rebuilt No.
8461.90.6020 - - - - - Other, valued under $3,025 each No.
8461.90.6030 - - - - - Other No.
- - - - Other:
8461.90.6040 - - - - - Used or rebuilt No.
8461.90.6050 - - - - - Other, valued under $3,025 each No.
8461.90.6090 - - - - - Other No.
84.62 - Machine tools (including presses) for working metal by forging, hammering or die-stamping; machine tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or m
8462.10 - - Forging or die-stamping machines (including presses) and hammers:
8462.10.0010 - - - Used or rebuilt No.
- - - Other:
8462.10.0030 - - - - Headers and upsetters, including cold headers No.
8462.10.0035 - - - - Mechanical transfer presses No.
8462.10.0055 - - - - Other No.
- - Bending, folding, straightening or flattening machines (including presses):
8462.21.0000 - - - Numerically controlled No.
8462.29 - - - Other:
8462.29.0010 - - - - Used or rebuilt No.
8462.29.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8462.29.0030 - - - - - Press brakes No.
8462.29.0040 - - - - - Bending rolls No.
8462.29.0050 - - - - - Other No.
- - Shearing machines (including presses), other than combined punching and shearing machines:
8462.31 - - - Numerically controlled:
8462.31.0040 - - - - Used or rebuilt No.
8462.31.0080 - - - - Other No.
8462.39 - - - Other:
8462.39.0010 - - - - Used or rebuilt No.
8462.39.0020 - - - - Other, valued under $3,025 each No.
8462.39.0050 - - - - Other No.
- - Punching or notching machines (including presses), including combined punching and shearing machines:
8462.41 - - - Numerically controlled:
8462.41.0040 - - - - Used or rebuilt No.
8462.41.0080 - - - - Other No.
8462.49 - - - Other:
8462.49.0010 - - - - Used or rebuilt No.
8462.49.0020 - - - - Other, valued under $3,025 each No.
8462.49.0050 - - - - Other No.
- - Other:
8462.91 - - - Hydraulic presses:
8462.91.0030 - - - - Used or rebuilt No.
8462.91.0060 - - - - Other, numerically controlled No.
8462.91.0090 - - - - Other No.
8462.99 - - - Other:
8462.99.0010 - - - - Used or rebuilt No.
8462.99.0020 - - - - Other, valued under $3,025 each No.
- - - - Other:
8462.99.0030 - - - - - Numerically controlled No.
- - - - - Other:
8462.99.0040 - - - - - - Mechanical No.
8462.99.0060 - - - - - - Other No.
84.63 - Other machine tools for working metal, or cermets, without removing material:
8463.10 - - Draw-benches for bars, tubes, profiles, wire or the like:
8463.10.0040 - - - Used or rebuilt No.
8463.10.0060 - - - Other, valued under $3,025 each No.
8463.10.0080 - - - Other No.
8463.20 - - Thread rolling machines:
8463.20.0040 - - - Used or rebuilt No.
8463.20.0060 - - - Other, valued under $3,025 each No.
8463.20.0080 - - - Other No.
8463.30 - - Machines for working wire:
8463.30.0040 - - - Used or rebuilt No.
8463.30.0060 - - - Other, valued under $3,025 each No.
8463.30.0080 - - - Other No.
8463.90 - - Other:
8463.90.0040 - - - Used or rebuilt No.
8463.90.0060 - - - Other, valued under $3,025 each No.
8463.90.0080 - - - Other No.
84.64 - Machine tools for working stone, ceramics, concrete, asbestos- cement or like mineral materials or for cold working glass:
8464.10.0100 - - Sawing machines No.
8464.20 - - Grinding or polishing machines:
8464.20.0110 - - - Glass-working machines No.
8464.20.0120 - - - Other No.
8464.90 - - Other:
8464.90.0110 - - - Glass-working machines No.
8464.90.0120 - - - Other No.
84.65 - Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials:
8465.10 - - Machines which can carry out different types of machining operations without tool change between such operations:
- - - Woodworking machines:
- - - - Used or rebuilt:
8465.10.0005 - - - - - Tenoners No.
8465.10.0015 - - - - - Other No.
- - - - Other:
- - - - - Tenoners:
8465.10.0025 - - - - - - Numerically controlled No.
8465.10.0035 - - - - - - Other No.
8465.10.0045 - - - - - Other No.
8465.10.0050 - - - Other No.
- - Other:
8465.91 - - - Sawing machines:
- - - - Woodworking machines:
- - - - - Used or rebuilt:
8465.91.0002 - - - - - - Rip saws No.
8465.91.0006 - - - - - - Panel saws No.
8465.91.0012 - - - - - - Band saws No.
8465.91.0020 - - - - - - Other No.
- - - - - Other:
8465.91.0027 - - - - - - Sawmill machines No.
- - - - - - Other:
8465.91.0032 - - - - - - - Radial arm saws No.
8465.91.0036 - - - - - - - Tilting arbor table saws No.
8465.91.0041 - - - - - - - Rip saws No.
8465.91.0047 - - - - - - - Miter saws No.
8465.91.0049 - - - - - - - Scroll saws No.
- - - - - - - Panel saws:
8465.91.0053 - - - - - - - - Valued under $3,000 each No.
8465.91.0058 - - - - - - - - Other No.
- - - - - - - Band saws:
8465.91.0064 - - - - - - - - Valued under $1,000 each No.
8465.91.0068 - - - - - - - - Other No.
8465.91.0076 - - - - - - - Other No.
8465.91.0090 - - - - Other No.
8465.92 - - - Planing, milling or molding (by cutting) machines:
- - - - For woodworking:
8465.92.0010 - - - - - Used or rebuilt No.
- - - - - Other:
8465.92.0021 - - - - - - Dovetailing No.
8465.92.0031 - - - - - - Moulders No.
8465.92.0041 - - - - - - Jointers No.
8465.92.0061 - - - - - - Shapers and profilers No.
8465.92.0074 - - - - - - Routers No.
8465.92.0078 - - - - - - Other No.
8465.92.0090 - - - - Other No.
8465.93 - - - Grinding, sanding or polishing machines:
- - - - For woodworking:
- - - - - Used or rebuilt:
8465.93.0004 - - - - - - Belt sanders, for a belt width 60 cm or wider No.
8465.93.0012 - - - - - - Other No.
- - - - - Other:
8465.93.0027 - - - - - - Edge belt sanders No.
8465.93.0065 - - - - - - Belt sanders, for a belt width 60 cm or wider No.
8465.93.0075 - - - - - - Other No.
8465.93.0090 - - - - Other No.
8465.94 - - - Bending or assembling machines:
- - - - For woodworking:
8465.94.0005 - - - - - Used or rebuilt No.
- - - - - Other:
8465.94.0015 - - - - - - Doweling machines No.
8465.94.0025 - - - - - - Edgebanding machines No.
8465.94.0035 - - - - - - Laminating machines No.
- - - - - - Presses:
8465.94.0045 - - - - - - - Cold No.
8465.94.0055 - - - - - - - Other No.
8465.94.0065 - - - - - - Other No.
8465.94.0090 - - - - Other No.
8465.95 - - - Drilling or mortising machines:
- - - - For woodworking:
8465.95.0028 - - - - - Used or rebuilt No.
- - - - - Other:
8465.95.0038 - - - - - - Drilling machines No.
8465.95.0065 - - - - - - Other No.
8465.95.0090 - - - - Other No.
8465.96 - - - Splitting, slicing or paring machines:
- - - - For woodworking:
8465.96.0015 - - - - - Log splitters No.
8465.96.0025 - - - - - Chippers No.
8465.96.0030 - - - - - Hogs No.
8465.96.0040 - - - - - Other No.
8465.96.0050 - - - - Other No.
8465.99 - - - Other:
- - - - Woodworking machines:
8465.99.0110 - - - - - Debarkers No.
8465.99.0120 - - - - - Lathes No.
8465.99.0130 - - - - - Other No.
8465.99.0150 - - - - Other No.
84.66 - Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for machine tools; tool holders for any type of
8466.10 - - Tool holders and self-opening dieheads:
8466.10.0110 - - - Tool holders for forming-type or cutting-type dies X
8466.10.0130 - - - Holders for replaceable cutting or drill inserts X
8466.10.0175 - - - Other (including chucks and chuck-holders) X
8466.20 - - Work holders:
- - - For machine tools used in cutting gears:
8466.20.1010 - - - - Jigs and fixtures X
8466.20.1090 - - - - Other X
- - - Other:
- - - - For metalworking machine tools:
8466.20.8020 - - - - - Jigs and fixtures X
8466.20.8035 - - - - - Other X
- - - - Other work holders:
8466.20.8040 - - - - - Jigs and fixtures X
8466.20.8065 - - - - - Other X
8466.30 - - Dividing heads and other special attachments for machine tools:
8466.30.1000 - - - Dividing heads X
- - - Other special attachments:
- - - - Machines:
8466.30.6040 - - - - - For woodworking machines X
8466.30.6085 - - - - - Other X
8466.30.8000 - - - - Other X
- - Other:
8466.91.0000 - - - For machines of heading 8464 X
8466.92 - - - For machines of heading 8465:
8466.92.0020 - - - - Of woodworking machines X
8466.92.0080 - - - - Other X
8466.93 - - - For machines of heading 8456 to 8461:
8466.93.3050 - - - - Of metalworking machine tools for cutting, grinding or finishing gears kg
8466.93.9050 - - - - Other kg
8466.94.0002 - - - For machines of heading 8462 or 8463 X
84.67 - Tools for working in the hand, pneumatic, hydraulic or with self- contained electric or nonelectric motor, and parts thereof:
- - Pneumatic:
8467.11 - - - Rotary type (including combined rotary-percussion):
- - - - Suitable for metalworking:
8467.11.1040 - - - - - Grinders, polishers and sanders No.
8467.11.1080 - - - - - Other No.
- - - - Other:
8467.11.5010 - - - - - Rock drills No.
8467.11.5020 - - - - - Other drills, screwdrivers and nut runners No.
8467.11.5040 - - - - - Other wrenches No.
8467.11.5090 - - - - - Other No.
8467.19 - - - Other:
8467.19.1000 - - - - Suitable for metalworking No.
- - - - Other:
8467.19.5030 - - - - - Pneumatic hand-held force feed lubricating equipment No.
8467.19.5060 - - - - - Designed for use in construction or mining No.
8467.19.5090 - - - - - Other No.
- - With self-contained electric motor:
8467.21 - - - Drills of all kinds:
- - - - Rotary:
8467.21.0010 - - - - - Battery powered No.
- - - - - Other:
8467.21.0030 - - - - - - With a chuck capacity of less than 12.7 mm ( inch) No.
8467.21.0050 - - - - - - Other No.
8467.21.0070 - - - - Other, including hammer drills No.
8467.22 - - - Saws:
8467.22.0020 - - - - Circular No.
8467.22.0040 - - - - Chain No.
8467.22.0070 - - - - Reciprocating and jig (including saber) No.
8467.22.0090 - - - - Other No.
8467.29 - - - Other:
- - - - Grinders, polishers and sanders:
8467.29.0010 - - - - - Angle grinders, sanders, and polishers No.
8467.29.0015 - - - - - Orbital and straight-line sanders No.
8467.29.0030 - - - - - Other No.
8467.29.0040 - - - - Screwdrivers, nut-runners and impact wrenches No.
8467.29.0055 - - - - Routers No.
8467.29.0065 - - - - Planers No.
8467.29.0070 - - - - Grass and weed trimmers/edgers No.
8467.29.0085 - - - - Electric scissors No.
8467.29.0095 - - - - Other No.
- - Other tools:
8467.81.0000 - - - Chain saws No.
8467.89 - - - Other:
8467.89.1000 - - - - Suitable for metalworking No.
- - - - Other:
8467.89.5030 - - - - - Gasoline powered grass and weed trimmers and brushcutters No.
8467.89.5060 - - - - - Other designed for use in agriculture or horticulture No.
8467.89.5090 - - - - - Other No.
- - Parts:
8467.91.0100 - - - Of chain saws X
8467.92 - - - Of pneumatic tools:
8467.92.0050 - - - - Of pneumatic, hand-held force feed lubricating equipment X
8467.92.0090 - - - - Other X
8467.99 - - - Other:
8467.99.0130 - - - - Of gasoline powered grass and weed trimmers and brushcutters X
8467.99.0190 - - - - Other X
84.68 - Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances; parts thereof:
8468.10.0000 - - Hand-held blow torches No.
8468.20 - - Other gas-operated machinery and apparatus:
8468.20.1000 - - - Hand-directed or -controlled No.
8468.20.5000 - - - Other No.
8468.80 - - Other machinery and apparatus:
8468.80.1000 - - - Hand-directed or -controlled No.
8468.80.5000 - - - Other No.
8468.90 - - Parts:
8468.90.1000 - - - Of hand-directed or -controlled machinery and apparatus X
8468.90.5000 - - - Other X
8469.00.0000 - Typewriters other than printers of heading 8443; word processing machines No.
84.70 - Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash r
8470.10.0000 - - Electronic calculators capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions No.
- - Other electronic calculating machines:
8470.21.0000 - - - Incorporating a printing device No.
8470.29.0000 - - - Other No.
8470.30.0000 - - Other calculating machines No.
8470.50 - - Cash registers:
8470.50.0020 - - - Point-of-sale terminals No.
8470.50.0060 - - - Other No.
8470.90 - - Other:
8470.90.0110 - - - Postage-franking machines No.
8470.90.0190 - - - Other No.
84.71 - Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included:
8471.30.0100 - - Portable automatic data processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display No.
- - Other automatic data processing machines:
8471.41 - - - Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined:
8471.41.0110 - - - - With cathode-ray tube (CRT) No.
8471.41.0150 - - - - Other No.
8471.49.0000 - - - Other, exported in the form of systems No.
8471.50 - - Processing units other than those of subheading 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of units; storage units, input units, output units:
8471.50.0110 - - - With cathode-ray tube (CRT) No.
8471.50.0150 - - - Other No.
8471.60 - - Input or output units, whether or not containing storage units in the same housing:
- - - Combined input/output units:
8471.60.1010 - - - - With cathode-ray tube (CRT) No.
8471.60.1050 - - - - Other No.
- - - Other:
8471.60.2000 - - - - Keyboards No.
- - - - Other:
8471.60.7000 - - - - - Units suitable for physical incorporation into automatic data processing machines or units thereof No.
8471.60.8000 - - - - - Optical scanners and magnetic ink recognition No.
- - - - - Other:
8471.60.9030 - - - - - - Card key and magnetic media entry devices No.
8471.60.9050 - - - - - - Other No.
8471.70 - - Storage units:
- - - Magnetic disk drive units:
- - - - For a disk of a diameter exceeding 21cm:
8471.70.1000 - - - - - Without read-write unit assembled therein; read -write units separately entered No.
8471.70.2000 - - - - - Units for physical incorporation into automatic data processing machines or units thereof No.
8471.70.3000 - - - - - Other No.
- - - - Other:
- - - - - Not assembled in cabinets, and without attached external power supply:
8471.70.4035 - - - - - - Flexible (floppy) magnetic disk drive units No.
8471.70.4065 - - - - - - Hard magnetic disk drive units No.
8471.70.4095 - - - - - - Other No.
- - - - - Other:
8471.70.5035 - - - - - - Flexible (floppy) magnetic disk drive units No.
8471.70.5065 - - - - - - Hard magnetic disk drive units No.
8471.70.5095 - - - - - - Other No.
- - - Other storage units:
8471.70.6000 - - - - Not assembled in cabinets for placing on a table, desk, wall, floor or similar place No.
8471.70.9000 - - - - Other No.
8471.80 - - Other units of automatic data processing machines:
8471.80.1000 - - - Control and adaptor units No.
- - - Other:
8471.80.4000 - - - - Units suitable for physical incorporation into auto- matic data processing machines No.
8471.80.9000 - - - - Other No.
8471.90.0000 - - Other No.
84.72 - Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating or stapling machines):
8472.10.0000 - - Duplicating machines No.
8472.30.0000 - - Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or canceling postage stamps No.
8472.90 - - Other:
8472.90.0500 - - - Addressing machines and address plate embossing machines No.
8472.90.1000 - - - Automatic teller machines No.
8472.90.9002 - - - Other No.
84.73 - Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8469 to 8472:
8473.10 - - Parts and accessories of the machines of heading 8469:
8473.10.0020 - - - Parts of word processing machines X
8473.10.0095 - - - Other X
- - Parts and accessories of the machines of heading 8470:
8473.21.0000 - - - Of the electronic calculating machines of subheading 8470.10, 8470.21 or 8470.29 X
8473.29.0000 - - - Other X
8473.30.0002 - - Parts and accessories of the machines of heading 8471 X
8473.40.0000 - - Parts and accessories of the machines of heading 8472 X
8473.50.0000 - - Parts and accessories equally suitable for use with machines of two or more of the headings 8469 to 8472 X
84.74 - Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other
8474.10 - - Sorting, screening, separating or washing machines:
8474.10.0010 - - - Portable No.
8474.10.0090 - - - Stationary No.
8474.20 - - Crushing or grinding machines:
8474.20.0010 - - - Portable No.
- - - Stationary:
8474.20.0050 - - - - Crushing No.
8474.20.0070 - - - - Other (grinding) No.
- - Mixing or kneading machines:
8474.31.0000 - - - Concrete or mortar mixers No.
8474.32.0000 - - - Machines for mixing mineral substances with bitumen No.
8474.39.0000 - - - Other No.
8474.80 - - Other machinery:
8474.80.0010 - - - Designed for use with ceramic paste, unhardened cements and plastering materials No.
8474.80.0020 - - - Machines for forming foundry molds of sand No.
8474.80.0090 - - - Other No.
8474.90 - - Parts:
8474.90.0010 - - - Of sorting, screening, separating or washing machines X
8474.90.0020 - - - Of crushing or grinding machines X
8474.90.0050 - - - Of mixing or kneading machines X
8474.90.0090 - - - Other X
84.75 - Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof:
8475.10.0000 - - Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes No.
- - Machines for manufacturing or hot-working glass or glassware:
8475.21.0000 - - - Machines for making optical fibers and preforms thereof No.
8475.29.0000 - - - Other No.
8475.90 - - Parts:
8475.90.1000 - - - Of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes X
8475.90.9000 - - - Other X
84.76 - Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money- changing machines; parts thereof:
- - Automatic beverage vending machines:
8476.21.0000 - - - Incorporating heating or refrigerating devices No.
8476.29.0000 - - - Other No.
- - Other machines:
8476.81.0000 - - - Incorporating heating or refrigerating devices No.
8476.89.0000 - - - Other No.
8476.90.0000 - - Parts X
84.77 - Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof:
8477.10 - - Injection-molding machines:
8477.10.9015 - - - Of a type used for processing rubber or other thermo- setting materials No.
8477.10.9025 - - - Of a type used for processing thermoplastics No.
8477.20 - - Extruders:
- - - Of a type used for processing rubber or other thermo- setting materials:
8477.20.0005 - - - - Single screw No.
8477.20.0015 - - - - Other, including multiple screw No.
- - - Of a type used for processing thermoplastics:
8477.20.0030 - - - - Single screw No.
8477.20.0060 - - - - Other, including multiple screw No.
8477.30.0000 - - Blow-molding machines No.
8477.40.0100 - - Vacuum-molding machines and other thermoforming machines No.
- - Other machinery for molding or otherwise forming:
8477.51 - - - For molding or retreading pneumatic tires or for molding or otherwise forming inner tubes:
8477.51.0010 - - - - For molding or retreading pneumatic tires No.
8477.51.0090 - - - - Other No.
8477.59.0100 - - - Other No.
8477.80.0000 - - Other machinery No.
8477.90 - - Parts:
8477.90.0010 - - - Of injection-molding machines X
8477.90.0020 - - - Of extruders X
8477.90.0030 - - - Of blow-molding machines X
8477.90.0040 - - - Of machines for forming pneumatic tires X
8477.90.0095 - - - Other parts X
84.78 - Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter; parts thereof:
8478.10 - - Machinery:
8478.10.0010 - - - Industrial cigarette-making machines No.
8478.10.0090 - - - Other No.
8478.90.0000 - - Parts X
84.79 - Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof:
8479.10 - - Machinery for public works, building or the like:
- - - Concrete and bituminous pavers, finishers and spreaders:
8479.10.0040 - - - - For concrete No.
8479.10.0060 - - - - For bituminous material No.
8479.10.0080 - - - Other No.
8479.20.0000 - - Machinery for the extraction or preparation of animal or fixed vegetable fats or oils No.
8479.30.0000 - - Presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork No.
8479.40.0000 - - Rope or cable-making machines No.
8479.50.0000 - - Industrial robots, n.e.s.o.i No.
8479.60.0000 - - Evaporative air coolers No.
- - Passenger boarding bridges:
8479.71.0000 - - - Of a kind used in airports No.
8479.79.0000 - - - Other No.
- - Other machines and mechanical appliances:
8479.81.0000 - - - For treating metal, including electric wire coil-winders No.
8479.82 - - - Mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring machines:
8479.82.0040 - - - - Mixing, kneading or stirring machines No.
8479.82.0080 - - - - Other No.
8479.89 - - - Other:
- - - - Electromechanical appliances with self-contained electric motor:
8479.89.1000 - - - - - Air humidifiers or dehumidifiers No.
8479.89.2000 - - - - - Floor polishers No.
8479.89.5500 - - - - - Trash compactors No.
8479.89.6500 - - - - - Other X
8479.89.7000 - - - - Carpet sweepers No.
- - - - Other:
8479.89.9850 - - - - - Oil and gas field wire line and downhole equipment No.
8479.89.9860 - - - - - Automotive maintenance machines No.
8479.89.9865 - - - - - Hydraulic accumulators No.
8479.89.9885 - - - - - Ultrasonic cleaning devices No.
8479.89.9895 - - - - - Industrial vibrators No.
8479.89.9898 - - - - - Other No.
8479.90 - - Parts:
8479.90.9440 - - - Of industrial robots X
- - - Other:
8479.90.9450 - - - - Of machinery for public works, building or the like X
8479.90.9460 - - - - Of presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork X
8479.90.9465 - - - - Of machines or mechanical appliances for treating metal X
8479.90.9498 - - - - Other X
84.80 - Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:
8480.10.0000 - - Molding boxes for metal foundry No.
8480.20.0000 - - Mold bases No.
8480.30.0000 - - Molding patterns No.
- - Molds for metal or metal carbides:
8480.41.0000 - - - Injection or compression types No.
8480.49.0000 - - - Other types No.
8480.50.0000 - - Molds for glass No.
8480.60.0000 - - Molds for mineral materials No.
- - Molds for rubber or plastics:
8480.71 - - - Injection or compression types:
8480.71.1000 - - - - For shoe machinery No.
8480.71.4000 - - - - For the manufacture of semiconductor devices No.
- - - - Other:
8480.71.8045 - - - - - Injection type No.
8480.71.8060 - - - - - Compression type No.
8480.79.0000 - - - Other types No.
84.81 - Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof:
8481.10 - - Pressure-reducing valves:
8481.10.0020 - - - Hydraulic fluid power type No.
- - - Pneumatic fluid power type:
8481.10.0040 - - - - Filter-regulators and filter-regulator-lubricators No.
8481.10.0060 - - - - Other No.
8481.10.0090 - - - Other No.
8481.20 - - Valves for oleohydraulic or pneumatic transmissions:
- - - Hydraulic valves:
- - - - Directional control:
8481.20.0010 - - - - - Manual type No.
8481.20.0020 - - - - - Solenoid type No.
8481.20.0030 - - - - - Other No.
8481.20.0040 - - - - Flow control type No.
8481.20.0050 - - - - Other No.
- - - Pneumatic valves:
- - - - Directional control
8481.20.0060 - - - - - Solenoid type No.
8481.20.0070 - - - - - Other No.
8481.20.0080 - - - - Other No.
8481.30 - - Check (nonreturn) valves:
- - - Of copper:
8481.30.1010 - - - - Having a pressure rating under 850 kPa (123 lbs. pressure) No. kg
8481.30.1090 - - - - Having a pressure rating of 850 kPa (123 lbs. pressure) or over No. kg
- - - Of iron or steel:
8481.30.2010 - - - - Of iron No. kg
8481.30.2090 - - - - Of steel No. kg
8481.30.9000 - - - Other No. kg
8481.40.0000 - - Safety or relief valves No. kg
8481.80 - - Other appliances:
- - - Hand operated:
- - - - Of copper:
8481.80.1010 - - - - - Having a pressure rating under 850 kPa (123 lbs. pressure) No. kg
- - - - - Having a pressure rating of 850 kPa (123 lbs. pressure) or over:
8481.80.1060 - - - - - - Gate type No. kg
8481.80.1070 - - - - - - Globe type No. kg
8481.80.1075 - - - - - - Plug type No. kg
8481.80.1085 - - - - - - Ball type No. kg
8481.80.1090 - - - - - - Butterfly type No. kg
8481.80.1095 - - - - - - Other No. kg
- - - - Of iron or steel:
- - - - - Of iron:
8481.80.3010 - - - - - - Gate type No. kg
8481.80.3015 - - - - - - Globe type No. kg
8481.80.3020 - - - - - - Plug type No. kg
8481.80.3025 - - - - - - Ball type No. kg
8481.80.3030 - - - - - - Butterfly type No. kg
8481.80.3040 - - - - - - Other No. kg
- - - - - Of steel:
8481.80.3055 - - - - - - Gate type No. kg
8481.80.3060 - - - - - - Globe type No. kg
8481.80.3065 - - - - - - Plug type No. kg
8481.80.3070 - - - - - - Ball type No. kg
8481.80.3075 - - - - - - Butterfly type No. kg
8481.80.3090 - - - - - - Other No. kg
- - - - Of other materials:
8481.80.5040 - - - - - Pressure spray can valves (lids) No. kg
8481.80.5060 - - - - - Bath, shower, sink and lavatory faucets No. kg
8481.80.5090 - - - - - Other No. kg
- - - Other:
8481.80.9005 - - - - Solenoid valves No.
8481.80.9010 - - - - Ballcock mechanisms No.
8481.80.9015 - - - - Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level No.
- - - - Other:
- - - - - With electrical or electro-hydraulic actuators:
8481.80.9020 - - - - - - Control valves designed for proportional operation by a signal from a control device No.
8481.80.9025 - - - - - - Other No.
8481.80.9030 - - - - - With hydraulic actuators No.
- - - - - With pneumatic actuators:
8481.80.9035 - - - - - - Control valves designed for proportional operation by a signal from a control device No.
8481.80.9040 - - - - - - Other No.
8481.80.9045 - - - - - With thermostatic actuators No.
8481.80.9050 - - - - - Other No.
8481.90 - - Parts:
8481.90.7000 - - - Of hand operated and check appliances kg
- - - Other:
8481.90.9010 - - - - Of valves of subheading 8481.20 kg
8481.90.9090 - - - - Other kg
84.82 - Ball or roller bearings, and parts thereof:
8482.10 - - Ball bearings:
8482.10.1000 - - - Ball bearings with integral shafts No.
- - - Other:
8482.10.5004 - - - - Unground bearings No.
- - - - Other:
8482.10.5008 - - - - - Thrust bearings No.
8482.10.5012 - - - - - Linear bearings No.
- - - - - Angular contact bearings:
- - - - - - Wheel hub bearing units:
8482.10.5016 - - - - - - - Flanged No.
8482.10.5024 - - - - - - - Other No.
8482.10.5028 - - - - - - Other No.
- - - - - Radial bearings:
- - - - - - Single row bearings:
8482.10.5032 - - - - - - - Maximum or full capacity type No.
- - - - - - - Other bearings, having an outside diameter of:
8482.10.5036 - - - - - - - - Under 9 mm No.
8482.10.5044 - - - - - - - - 9 mm and over but not over 30 mm No.
8482.10.5048 - - - - - - - - Over 30 mm but not over 52 mm No.
8482.10.5052 - - - - - - - - Over 52 mm but not over 100 mm No.
8482.10.5056 - - - - - - - - Over 100 mm No.
8482.10.5060 - - - - - - Double row bearings No.
8482.10.5064 - - - - - - Other No.
8482.10.5068 - - - - - Other No.
8482.20 - - Tapered roller bearings, including cone and tapered roller assemblies:
- - - Cup and cone assemblies entered as a set:
- - - - Wheel hub units:
8482.20.0020 - - - - - Flanged No.
8482.20.0030 - - - - - Other No.
- - - - Other:
8482.20.0040 - - - - - With cups having an outside diameter not exceeding 102 mm No.
8482.20.0060 - - - - - Other No.
- - - Cone assemblies entered separately:
8482.20.0070 - - - - For cups having an outside diameter not exceeding 102 mm No.
8482.20.0080 - - - - Other No.
8482.30 - - Spherical roller bearings:
8482.30.0040 - - - Single row No.
8482.30.0080 - - - Other No.
8482.40.0000 - - Needle roller bearings No.
8482.50.0000 - - Other cylindrical roller bearing No.
8482.80 - - Other, including combined ball/roller bearings:
8482.80.0020 - - - Combined ball and spherical roller bearings No.
8482.80.0040 - - - Combined ball and needle roller bearings No.
8482.80.0060 - - - Combined ball and other cylindrical roller bearings No.
8482.80.0080 - - - Other No.
- - Parts:
8482.91 - - - Balls, needles and rollers:
- - - - Balls:
8482.91.0010 - - - - - Of alloy steel kg
8482.91.0020 - - - - - Other kg
8482.91.0040 - - - - Needles kg
8482.91.0050 - - - - Tapered rollers kg
8482.91.0070 - - - - Spherical rollers kg
8482.91.0080 - - - - Other cylindrical rollers kg
8482.91.0090 - - - - Other kg
8482.99 - - - Other:
- - - - Parts of ball bearings (including parts of ball bearing with integral shafts):
8482.99.1010 - - - - - Inner and outer races No.
8482.99.1050 - - - - - Other kg
- - - - Parts of tapered roller bearings:
8482.99.3010 - - - - - Cups exported separately No.
8482.99.3050 - - - - - Other kg
8482.99.5000 - - - - Parts of spherical roller bearings kg
- - - - Parts of other roller bearings or combined ball/roller bearings:
8482.99.7030 - - - - - Of needle bearings kg
8482.99.7060 - - - - - Of other cylindrical roller bearings kg
8482.99.7090 - - - - - Other kg
84.83 - Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and p
8483.10 - - Transmission shafts (including camshafts and crankshafts) and cranks:
- - - Camshafts and crankshafts:
- - - - Designed for use solely or principally with spark- ignition internal combustion piston engines or rotary engines:
8483.10.1020 - - - - - For vehicles of chapter 87 kg
8483.10.1050 - - - - - Other No. kg
- - - - Other:
8483.10.3010 - - - - - For vehicles of chapter 87 No. kg
8483.10.3050 - - - - - Other No. kg
8483.10.5000 - - - Other transmission shafts and cranks kg
8483.20 - - Housed bearings, incorporating ball or roller bearings:
8483.20.0010 - - - Incorporating ball bearings No.
8483.20.0050 - - - Incorporating roller bearings No.
8483.30 - - Bearing housings; plain shaft bearings:
- - - Bearing housings:
8483.30.5020 - - - - Ball or roller bearing type kg
8483.30.5040 - - - - Other kg
- - - Plain shaft bearings:
- - - - With housing:
8483.30.8055 - - - - - Rod end bearings No. kg
8483.30.8065 - - - - - Other No. kg
- - - - Without housing:
8483.30.8070 - - - - - Spherical No. kg
8483.30.8090 - - - - - Other No. kg
8483.40 - - Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements exported separately; ball or roller screws; gear boxes and other speed changers, including torque converters:
8483.40.1000 - - - Torque converters No.
- - - Gear boxes and other speed changers:
- - - - Fixed ratio speed changers, multiple and variable ratio speed changers each ratio of which is selected by manual manipulation:
8483.40.4010 - - - - - Fixed ratio speed changers No.
8483.40.4050 - - - - - Other No.
8483.40.7000 - - - - Other speed changers No.
8483.40.8000 - - - Ball or roller screws X
8483.40.9000 - - - Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements exported separately X
8483.50 - - Flywheels and pulleys, including pulley blocks:
8483.50.8030 - - - Grooved pulleys X
8483.50.8080 - - - Other X
8483.60 - - Clutches and shaft couplings (including universal joints):
8483.60.4000 - - - Clutches and universal joints X
8483.60.8000 - - - Other X
8483.90 - - Toothed wheels, chain sprockets, and other transmission elements presented separately; parts:
8483.90.1000 - - - Chain sprockets and parts thereof kg
8483.90.5000 - - - Parts of gearing, gear boxes and other speed changers X
- - - Other:
8483.90.8010 - - - - Parts of the articles of subheading 8483.60.80 X
8483.90.9500 - - - - Other X
84.84 - Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of up in pouches, envelopes or similar packings; mechanical seals:
8484.10.0000 - - Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal X
8484.20.0000 - - Mechanical seals No.
8484.90.0000 - - Other No.
84.86 - Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semi- conductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 9(C) to this chap
8486.10.0000 - - Machines and apparatus for the manufacture of boules or wafers No.
8486.20.0000 - - Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits No.
8486.30.0000 - - Machines and apparatus for the manufacture of flat panel displays No.
8486.40 - - Machines and apparatus specified in note 9(C) to this chapter:
8486.40.0010 - - - For the manufacture or repair of masks and reticles No.
8486.40.0020 - - - For assembling semiconductor devices or electronic integrated circuits No.
8486.40.0030 - - - For lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays No.
8486.90.0000 - - Parts and accessories X
84.87 - Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in this chapter:
8487.10.0000 - - Ships' or boats' propellers and blades therefor X
8487.90 - - Other:
8487.90.0040 - - - Oil seals, other than those of chapter 40 No.
8487.90.0080 - - - Other X

Source: U.S. Census Bureau | Foreign Trade | ftdwebm 7;ster@census.gov |  Last Revised: April 22, 2014