Alaska Native Regional Corporation (ANRC) (See American Indian Area, Alaska Native area, Hawaiian home land)
Alaska Native Village (ANV) (See American Indian Area, Alaska Native area, Hawaiian home land)
Alaska Native Village Statistical Area (ANVSA) (See American Indian Area, Alaska Native Area, Hawaiian home land)
American Indian Area, Alaska Native area, Hawaiian home land
American Indian Off-Reservation Trust Land (See American Indian Area, Alaska Native Area, Hawaiian home land)
American Indian Reservation (See American Indian Area, Alaska Native area, Hawaiian home land)
American Indian Tribal Subdivision (See American Indian Area, Alaska Native area, Hawaiian home land)
Barrio (See Puerto Rico)
Barrio-Pueblo (See Puerto Rico)
Block (See Census Block)
Block Group (BG)
Borough (See County (or Statistically Equivalent Entity), see County Subdivision, see Place)
Census Area (See County (or Statistically Equivalent Entity))
Census Code (See Geographic Code)
Census County Division (CCD) (See County Subdivision)
Census Designated Place (CDP) (See Place)
Census Division (See also Census Region)
Census Geographic Code (See Geographic Code)
Census Region (See also Census Division)
Central City (See Metropolitan Area)
Central Place (See Urban and Rural)
City (See Place)
Comparability (See Boundary Changes)
Comunidad (See Puerto Rico)
Congressional District (CD)
Consolidated and Primary Metropolitan Statistical Area (CMSA and PMSA) (See Metropolitan Area)
Consolidated City (See Place)
County (or Statistically Equivalent Entity)
Division (See Census Division)
Extended City (See Urban and Rural)
Extended Place (See Urban and Rural)
Federal Information Processing Standards (FIPS) Code (See Geographic Code)
Geographic Hierarchy (See Introduction-Geographic Presentation of Data)
Geographic Presentation (See Introduction-Geographic Presentation of Data)
Hawaiian home land (HHL) (See American Indian Area, Alaska Native Area, Hawaiian home land)
Hierarchical Presentation (See Introduction-Geographic Presentation of Data)
Incorporated Place (See Place, see County Subdivision)
Independent City (See County (or Statistically Equivalent Entity))
Introduction-Geographic Presentation of Data
Inventory Presentation (See Introduction- Geographic Presentation of Data)
Island Areas of the United States
Joint Use Area (See American Indian Area, Alaska Native area, Hawaiian home land)
Land Area (See Area Measurement)
Latitude (See Internal Point)
Longitude (See Internal Point)
Metropolitan Area (MA)
Metropolitan Area Title and Code (See Metropolitan Area)
Metropolitan Statistical Area (MSA) (See Metropolitan Area)
Minor Civil Division (MCD) (See County Subdivision)
Municipio(See Puerto Rico)
New England County Metropolitan Area (NECMA) (See Metropolitan Area)
Off-Reservation Trust Land (See American Indian Area, Alaska Native Area, Hawaiian home land)
Oklahoma Tribal Statistical Area (OTSA) (See American Indian Area, Alaska Native Area, Hawaiian home land)
Outlying Areas (See Island Areas of the United States)
Parish (See County)
Place Within Consolidated City (See Place)
Population or Housing Unit Density
Precinct (See Voting District)
Primary Metropolitan Statistical Area (PMSA) (See Metropolitan Area)
Public Use Microdata Area (PUMA)
Public Use Microdata Sample (PUMS) File (See Public Use Microdata Area)
Region (See Census Region)
Rural (See Urban and Rural)
State (or Statistically Equivalent Entity)
State Designated American Indian Statistical Area (SDAISA) (See American Indian Area, Alaska Native area, Hawaiian home land)
State Legislative District (SLD)
Subbarrio (See Puerto Rico)
Sub-MCD (See Puerto Rico)
Tabulation Block Group (See Block Group)
Town (See County Subdivision, see Place)
Township (See County Subdivision)
Tract (See Census Tract)
Traffic Analysis Zone (TAZ)
Tribal Designated Statistical Area (TDSA) (See American Indian Area, Alaska Native Area, Hawaiian home land)
Tribal Jurisdiction Statistical Area (TJSA) (See American Indian Area, Alaska Native Area, Hawaiian home land)
Trust Land (See American Indian Area, Alaska Native area, Hawaiian home land)
United States Postal Service (USPS) Code (See Geographic Code)
Unorganized Territory (See County Subdivision)
Urban (See Urban and Rural)
Urban and Rural
Urban Cluster (UC)(See Urban and Rural)
Urban Cluster Central Place (See Urban and Rural)
Urban Cluster Title and Code (See Urban and Rural)
Urban Growth Area (UGA)
Urban Growth Boundary (See Urban Growth Area)
Urbanized Area (UA) (See Urban and Rural)
Urbanized Area Central Place (See Urban and Rural)
Urbanized Area Title and Code (See Urban and Rural)
Village (See Place)
Voting District (VTD)
Water Area (See Area Measurement)
ZIP® Code (See ZIP Code Tabulation Area)
ZIP Code® Tabulation Area (ZCTATM)
Zona Urbana (See Puerto Rico)
INTRODUCTION -GEOGRAPHIC PRESENTATION OF DATA
In decennial census data products, geographic entities usually are presented in an hierarchical arrangement or as an inventory listing.
An hierarchical geographic presentation shows the geographic entities in a superior/subordinate structure. This structure is derived from the legal, administrative, or areal relationships of the entities. The hierarchical structure is depicted in report tables by means of indentation, and is explained for computer-readable media in the geographic coverage portion of the abstract in the technical documentation. An example of hierarchical presentation is the "standard census geographic hierarchy": census block, within block group, within census tract, within place, within county subdivision, within county, within state, within division, within region, within the United States. Graphically, this is shown as:
Attachment A, which is a diagram of the geographic hierarchy, presents this information as a series of nesting relationships. For example, a line joining the lower-level entity place and the higher-level entity state means that a place cannot cross a state boundary; a line linking census tract and county means that a census tract cannot cross a county line; and so forth.
An inventory presentation of geographic entities is one in which all entities of the same type are shown in alphabetical, code, or geographic sequence, without reference to their hierarchical relationships. Generally, an inventory presentation shows totals for entities that may be split in a hierarchical presentation, such as place, census tract, or block group. An example of a series of inventory presentations is: state, followed by all the counties in that state, followed by all the places in that state. Graphically, this is shown as:
American Indian/Alaska Native area/Hawaiian home land Entities
Exceptions to the standard hierarchical presentation occur in the case of certain American Indian/Alaska Native area (AIANA) and Hawaiian home land (HHL) entities, which do not necessarily nest within states and counties. For instance, the following American Indian entities can cross state lines: federally recognized American Indian reservations, off-reservation trust lands, tribal subdivisions, Oklahoma tribal statistical areas, and tribal designated statistical areas. National summary data for American Indian reservations may be presented as an alphabetical listing of reservation names followed by the state portions of each reservation. Also, a census tract or block group delineated by American Indian tribal authorities may be located in more than one state or county (see CENSUS TRACT) for the purpose of presenting decennial census data in the AIANA/HHL hierarchy.
The diagram in Attachment B shows geographic relationships among geographic entities in the AIANA/HHL hierarchy. It does not show the geographic levels county, county subdivision, and place because AIANA/HHL entities do not necessarily nest within them.
The definitions below are for geographic entities and concepts that the U.S. Census Bureau includes in its standard data products. Not all entities and concepts are shown in any one data product.
AMERICAN INDIAN AREA, ALASKA NATIVE AREA, HAWAIIAN HOME LAND
There are both legal and statistical American Indian, Alaska Native, and Native Hawaiian entities for which the U.S. Census Bureau provides data for Census 2000. The legal entities consist of federally recognized American Indian reservations and off-reservation trust land areas, the tribal subdivisions that can divide these entities, state recognized American Indian reservations, Alaska Native Regional Corporations, and Hawaiian home lands. The statistical entities are Alaska Native village statistical areas, Oklahoma tribal statistical areas, tribal designated statistical areas, and state designated American Indian statistical areas. Tribal subdivisions can exist within the statistical Oklahoma tribal statistical areas.
In all cases, these areas are mutually exclusive in that no American Indian, Alaska Native, or Hawaiian home land can overlap another tribal entity, except for tribal subdivisions, which subdivide some American Indian entities, and Alaska Native village statistical areas, which exist within Alaska Native Regional Corporations. In some cases where more than one tribe claims jurisdiction over an area, the U.S. Census Bureau creates a joint use area as a separate entity to define this area of dual claims. The following provides more detail about each of the various American Indian areas, Alaska Native areas, and Hawaiian home lands.
Alaska Native Regional Corporation (ANRC)
Alaska Native Regional Corporations (ANRCs) are corporate entities established under the Alaska Native Claims Settlement Act of 1972, Public Law 92-203, as amended by Public Law 94-204, to conduct both business and nonprofit affairs of Alaska Natives. Alaska is divided into 12 ANRCs that cover all of the state except for the Annette Island Reserve (an American Indian reservation). A thirteenth ANRC represents Alaska Natives who do not live in Alaska and do not identify with any of the 12 corporations.
ANRC boundaries have been established by the Department of the Interior in cooperation with Alaska Natives. Each ANRC is designed to include Alaska Natives with a common heritage and common interests. The U.S. Census Bureau offers representatives of the 12 nonprofit ANRCs the opportunity to review and update the ANRC boundaries. The U.S. Census Bureau first provided data for ANRCs for the 1990 census.
Each ANRC is assigned a five-digit Federal Information Processing Standards (FIPS) code, which is assigned in alphabetical order by ANRC name.
Alaska Native Village Statistical Area (ANVSA)
Alaska Native village statistical areas (ANVSAs) represent the settled portion of Alaska Native villages (ANVs), which constitute tribes, bands, clans, groups, villages, communities, or associations established as part of the Alaska Native Claims Settlement Act of 1972, Public Law 92-203, as amended by Public Law 94-204.
Because ANVs usually do not have boundaries that are easily locatable and often include many square miles of land used by Alaska Natives for hunting and fishing, the U.S. Census Bureau established ANVSAs for purposes of decennial census data presentation. ANVSAs are delineated or reviewed by officials of the ANV or the Alaska Native Regional Corporation (ANRC) in which the ANV is located. An ANVSA may not overlap the boundary of another ANVSA, an American Indian reservation, or a tribal designated statistical area (TDSA). The U.S. Census Bureau first provided data for ANVSAs for the 1990 census.
Each ANVSA is assigned a national four-digit census code ranging from 6000 through 7999. Each ANVSA also is assigned a state-based, five-digit Federal Information Processing Standards (FIPS) code. Both the census and FIPS codes are assigned in alphabetical order by ANVSA name.
American Indian Reservation
Federal American Indian reservations are areas with boundaries established by treaty, statute, and/or executive or court order, and, along with off-reservation trust lands, are recognized by the federal government as territory in which American Indian tribes have primary governmental authority. The U.S. Census Bureau contacts representatives of American Indian tribal governments to identify the boundaries for federal reservations.
State reservations are lands held in trust by state governments for the use and benefit of a given tribe. A governor-appointed state liaison provides the names and boundaries for state reservations. The names of American Indian reservations recognized by state governments, but not by the federal government, are followed by (State) in the data presentations.
Federal reservations may cross state boundaries, and federal and state reservations may cross county, county subdivision, and place boundaries. For reservations that cross state boundaries, only the portions of the reservations in a given state are shown in the data products for that state. Lands that are administered jointly and/or are claimed by two tribes, whether federally or state recognized, are called joint use areas and are treated as if they are separate American Indian reservations for decennial census data presentation purposes. The entire reservations are shown in data products for the United States. The U.S. Census Bureau first provided data for American Indian reservations in the 1970 census.
American Indian reservations are known as colonies, communities, pueblos, rancherias, ranches, reservations, reserves, tribal towns, and tribal villages. Each federal American Indian reservation is assigned a four-digit census code ranging from 0001 through 4999. These census codes are assigned in alphabetical order of American Indian reservation names nationwide, except that joint use areas appear at the end of the code range. Each state American Indian reservation is assigned a four-digit census code ranging from 9000 through 9499. Each American Indian reservation also is assigned a five-digit Federal Information Processing Standards (FIPS) code; because FIPS codes are assigned in alphabetical sequence within each state, the FIPS code is different in each state for reservations that include territory in more than one state.
American Indian Off-Reservation Trust Land
Off-reservation trust lands, along with reservation lands, constitute the territory over which American Indian tribes have primary governmental authority. Trust land is property associated with a particular American Indian reservation or tribe, held in trust by the federal government. Trust land may be held in trust either for a tribe (tribal trust land) or for an individual member of a tribe (individual trust land). Trust lands recognized in data tabulations are always off-reservation; that is, they comprise all tribal and individual trust lands located outside of a reservation boundary. Such trust lands may be located in more than one state. Only the portions of off-reservation trust lands in a given state are shown in the data products for that state; all off-reservation trust lands associated with a reservation or tribe are shown in data products for the United States. The U.S. Census Bureau first provided trust land data for off-reservation tribal trust lands in the 1980 census; in 1990, the trust land data included both tribal and individual trust lands. The U.S. Census Bureau does not identify restricted fee land or land in fee simple status as a specific geographic category.
In decennial census data tabulations, off-reservation trust lands are assigned a four-digit census code and a five-digit Federal Information Processing Standards (FIPS) code that is the same as that for the reservation with which they are associated. As with reservations, FIPS codes for off-reservation trust lands are unique within state, so they will differ if they extend into more than one state. The FIPS codes for such off-reservation trust lands are the same as those for the associated reservation. In the TIGER/Line® products, a letter code-"T" for tribal and "I" for individual-identifies off-reservation trust lands. In decennial census data tabulations, a trust land flag uniquely identifies off-reservation trust lands. Printed reports show separate tabulations for all off-reservation trust land areas, but do not provide separate tabulations for the tribal versus individual trust lands. Trust lands associated with tribes that do not have a reservation are presented and coded by tribal name, interspersed alphabetically among the reservation names.
American Indian Tribal Subdivision
American Indian tribal subdivisions are administrative subdivisions of federally recognized American Indian reservations, off-reservation trust lands, and Oklahoma tribal statistical areas (OTSAs). Tribal subdivisions are called areas, chapters, communities, districts, and so forth. These entities are internal units of self-government or administration that serve social, cultural, and/or economic purposes for American Indians on reservations, off-reservation trust lands, or OTSAs. The U.S. Census Bureau obtains the boundary and name information for tribal subdivisions from tribal governments. The U.S. Census Bureau first provided data for American Indian tribal subdivisions in the 1980 census when it identified them as American Indian subreservation areas. It did not provide data for these entities in conjunction with the 1990 census.
Each American Indian tribal subdivision is assigned a three-digit census code that is alphabetically in order and unique within each reservation, associated off-reservation trust land, and OTSA. Each tribal subdivision also is assigned a five-digit Federal Information Processing Standards (FIPS) code. FIPS codes are assigned alphabetically within state; the FIPS codes are different in each state for tribal subdivisions that extend into more than one state.
Hawaiian home land (HHL)
Hawaiian home lands (HHLs) are lands held in trust for Native Hawaiians by the State of Hawaii, pursuant to the Hawaiian Homes Commission Act of 1920, as amended. The U.S. Census Bureau obtained the names and boundaries of HHLs from state officials. HHLs are a new geographic entity for Census 2000.
Each HHL area is assigned a national four-digit census code ranging from 5000 through 5499 based on the alphabetical sequence of each HHL name. Each HHL also is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within the state of Hawaii.
Oklahoma Tribal Statistical Area (OTSA)
Oklahoma tribal statistical areas (OTSAs) are statistical entities identified and delineated for the U.S. Census Bureau by federally recognized American Indian tribes in Oklahoma that formerly had a reservation but do not now have a reservation in that state. An OTSA encompasses an area that is defined by the boundary of the tribe's former reservation in Oklahoma that had legally established boundaries but was dissolved preceding the establishment of Oklahoma as a state in 1907. In some cases, this boundary was adjusted for data presentation purposes. If tribal officials of adjacent OTSAs delineate an area of overlap, the U.S. Census Bureau calls this a joint use area and treats it as a separate OTSA for census purposes. OTSAs may cross the boundary of Oklahoma and include territory in a neighboring state but not territory in any reservation. OTSAs replace the tribal jurisdiction statistical areas (TJSAs) of the 1990 census. The U.S. Census Bureau first provided data for these former reservations in conjunction with the 1980 census, when it defined a single all-encompassing geographic entity called the Historic Areas of Oklahoma (excluding urbanized areas).
Each OTSA is assigned a national four-digit census code ranging from 5500 through 5999 based on the alphabetical sequence of each OTSA's name, except that the joint use areas appear at the end of the code range. Each OTSA also is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order in Oklahoma and separately in any other state into which it extends.
State Designated American Indian Statistical Area (SDAISA)
State designated American Indian statistical areas (SDAISAs) are statistical entities for state recognized American Indian tribes that do not have a state recognized land base (reservation). SDAISAs are identified and delineated for the U.S. Census Bureau by a state liaison identified by the governor's office in each state. SDAISAs generally encompass a compact and contiguous area that contains a concentration of individuals who identify with a state recognized American Indian tribe and in which there is structured or organized tribal activity. A SDAISA may not be located in more than one state unless the tribe is recognized by both states, and it may not include area within an American Indian reservation, off-reservation trust land, Alaska Native village statistical area, tribal designated statistical area (TDSA), or Oklahoma tribal statistical area.
The U.S. Census Bureau established SDAISAs as a new geographic statistical entity for Census 2000 to differentiate between state recognized tribes without a land base and federally recognized tribes without a land base. For the 1990 census, all such tribal entities had been identified as TDSAs.
Each SDAISA is assigned a four-digit census code ranging from 9500 through 9999 in alphabetical sequence of SDAISA name nationwide. Each SDAISA also is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within state.
Tribal Designated Statistical Area (TDSA)
Tribal designated statistical areas (TDSAs) are statistical entities identified and delineated for the U.S. Census Bureau by federally recognized American Indian tribes that do not currently have a federally recognized land base (reservation or off-reservation trust land). A TDSA encompasses a compact and contiguous area that contains a concentration of individuals who identify with a federally recognized American Indian tribe and in which there is structured or organized tribal activity. A TDSA may be located in more than one state, and it may not include area within an American Indian reservation, off-reservation trust land, Alaska Native village statistical area, state designated American Indian statistical area (SDAISA), or Oklahoma tribal statistical area.
The U.S. Census Bureau first reported data for TDSAs in conjunction with the 1990 census, when both federally and state recognized tribes could identify and delineate TDSAs. TDSAs now apply only to federally recognized tribes. State recognized tribes without a land base, including those that were TDSAs in 1990, are identified as state designated American Indian statistical areas (SDAISAs), a new geographic entity for Census 2000.
Each TDSA is assigned a four-digit census code ranging from 8000 through 8999 in alphabetical sequence of TDSA name nationwide. Each TDSA also is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within state; because FIPS codes are assigned within each state, the FIPS code is different in each state for TDSAs that extend into more than one state.
Area measurement data provide the size, in square units (metric and nonmetric) of geographic entities for which the U.S. Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the U.S. Census Bureau's geographic database (see TIGER® database). These area measurements are recorded as whole square meters. (To convert square meters to square kilometers, divide by 1,000,000; to convert square kilometers to square miles, divide by 2.58999; to convert square meters to square miles, divide by 2,589,988.)
The U.S. Census Bureau provides area measurement data for both land area and total water area. The water area figures include inland, coastal, Great Lakes, and territorial water. (For the 1990 census, the U.S. Census Bureau provided area measurements for land and total water; water area for each of the four water classifications was available in the Geographic Identification Code Scheme (GICS) product only.) Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the U.S. Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two-dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as the Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for statistical data presentation purposes only and does not necessarily reflect their legal definitions.
Land and water area measurements may disagree with the information displayed on U.S. Census Bureau maps and in the TIGER® database because, for area measurement purposes, features identified as intermittent water and glacier are reported as land area. For this reason, it may not be possible to derive the land area for an entity by summing the land area of its component census blocks. In addition, the water area measurement reported for some geographic entities includes water that is not included in any lower-level geographic entity. Therefore, because water is contained only in a higher-level geographic entity, summing the water measurements for all the component lower-level geographic entities will not yield the water area of that higher-level entity. This occurs, for example, where water is associated with a county but is not within the legal boundary of any minor civil division. Crews-of-vessels entities (see CENSUS TRACT and CENSUS BLOCK) do not encompass territory and, therefore, have no area measurements.
The accuracy of any area measurement data is limited by the accuracy inherent in (1) the location and shape of the various boundary information in the TIGER® database, (2) the location and shapes of the shorelines of water bodies in that database, and (3) rounding affecting the last digit in all operations that compute and/or sum the area measurements.
BLOCK GROUP (BG)
A block group (BG) is a cluster of census blocks having the same first digit of their four-digit identifying numbers within a census tract. For example, block group 3 (BG 3) within a census tract includes all blocks numbered from 3000 to 3999. BGs generally contain between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The U.S. Census Bureau delineated BGs only where a local, state, or tribal government declined to participate or where the U.S. Census Bureau could not identify a potential local or tribal participant.
BGs never cross the boundaries of states, counties, or statistically equivalent entities, except for a BG delineated by American Indian tribal authorities, and then only when tabulated within the American Indian hierarchy. BGs never cross the boundaries of census tracts, but may cross the boundary of any other geographic entity required as a census block boundary (see CENSUS BLOCK).
In decennial census data tabulations, a BG may be split to present data for every unique combination of American Indian area, Alaska Native area, Hawaiian home land, congressional district, county subdivision, place, voting district, or other tabulation entity shown in the data products. For example, if BG 3 is partly in a city and partly outside the city, there are separate tabulated records for each portion of BG 3. BGs are used in tabulating data nationwide, as was done for the 1990 census, for all block-numbered areas in the 1980 census, and for selected areas in the 1970 census. For purposes of data presentation, BGs are a substitute for the enumeration districts (EDs) used for reporting data in many parts of the United States for the 1970 and 1980 censuses and in all areas before 1970.
Many of the legal and statistical entities for which the U.S. Census Bureau tabulates decennial census data have had boundary changes between the 1990 census and Census 2000; that is, between January 2, 1990, and January 1, 2000. Boundary changes to legal entities result from:
1. Annexations to or detachments from legally established governmental units.
2. Mergers or consolidations of two or more governmental units.
3. Establishment of new governmental units.
4. Disincorporations or disorganizations of existing governmental units.
5. Changes in treaties or executive orders, and governmental action placing additional lands in trust.
6. Decisions by federal, state, and local courts.
7. Redistricting for congressional districts or county subdivisions that represent single-member districts for election to a county governing board.
Statistical entity boundaries generally are reviewed by local, state, or tribal governments and can have changes to adjust boundaries to visible features, to better define the geographic area each encompasses, or to account for shifts and changes in the population distribution within an area.
The historical counts shown for counties; county subdivisions; places; and American Indian, Alaska Native, and Native Hawaiian areas are not updated for such changes, and thus reflect the population and housing units in each entity as delineated at the time of each decennial census. Boundary changes are not reported for some entities, such as census designated places and block groups.
Changes to the boundaries for census tracts and, for the first time, for census blocks are available in relationship files, which are only available in computer-readable form. The census tract relationship files feature the relationship of census tracts/block numbering areas at the time of the 1990 census to census tracts for Census 2000, and vice versa, including partial relationships. For the first time, the census tract relationship files show a measure of the magnitude of change using the proportion of the length of roads and sides of roads contained in partial census tracts. This information can be used to proportion the data for the areas where census tracts have changed.
The census block relationship files, which are available only in computer-readable form, present relationships of the 1990 census and Census 2000 blocks on the basis of whole blocks (W) or part blocks (P). The following relationships can be derived:
|1990 census block||2000 census block|
|One to one|
|One to many|
|Many to one|
|Many to many|
Block relationship files are available to compare the following sets of census blocks:
Census tract relationship files and block relationship files are not geographic equivalency files. For a true areal comparison between the census tracts/block numbering areas and blocks used for the 1990 census and the census tracts and blocks used for Census 2000 (as well as other geographic areas), it is necessary to use the TIGER/Line 2000 files. The TIGER/Line 2000 files will contain 1990 and 2000 boundaries for counties and statistically equivalent entities, county subdivisions, places, American Indian areas, Alaska Native village statistical areas, census tracts, census blocks, and by derivation from the census blocks, block groups.
Census blocks are areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and by invisible boundaries, such as city, town, township, and county limits, property lines, and short, imaginary extensions of streets and roads. Generally, census blocks are small in area; for example, a block bounded by city streets. However, census blocks in remote areas may be large and irregular and contain many square miles.
All territory in the United States, Puerto Rico, and the Island Areas has been assigned block numbers, as was the case for the 1990 census. To improve operational efficiency and geographic identifications, the U.S. Census Bureau has introduced different numbering systems for tabulation blocks used in decennial census data products and for collection blocks used in administering the census. (In 1990, there generally was a single numbering system.) Collection block numbers are available only in the TIGER/Line data products; the U.S. Census Bureau does not tabulate data for collection blocks.
Many tabulation blocks, used in decennial census data products, represent the same geographic area as the collection blocks used in the Census 2000 enumeration process. Where the collection blocks include territory in two or more geographic entities, each unique piece required for data tabulation is identified as a separate tabulation block with a separate block number. It is possible for two or more collection blocks to be combined into a single tabulation block. This situation can occur when a visible feature established as a collection block boundary is deleted during the field update operation. Tabulation blocks do not cross the boundaries of any entity for which the U.S. Census Bureau tabulates data, including American Indian areas, Alaska Native areas, Hawaiian home lands, census tracts, congressional districts, counties, county subdivisions, places, state legislative districts, urban and rural areas, school districts, voting districts, and ZIP Code® tabulation areas. Tabulation blocks also do not cross the boundaries of certain landmarks, including military installations, national parks, and national monuments.
Tabulation blocks are identified uniquely within census tract by means of a four-digit number. (The 1990 census block numbers had three digits, with a potential alphabetic suffix.) The Census 2000 collection blocks are numbered uniquely within county (or statistically equivalent entity), and consist of four or five digits, with no suffixes. The U.S. Census Bureau created tabulation blocks immediately before beginning its Census 2000 data tabulation process, thereby eliminating block suffixes. For the 1990 census, the U.S. Census Bureau created a separate block with a suffix of "Z" to identify crews-of-vessels population. For Census 2000, crews-of-vessels population is assigned to the land block identified by the U.S. Census Bureau as associated with the home port of the vessel.
Participants in certain U.S. Census Bureau-sponsored programs were able to request that line features in the TIGER database be held as tabulation block boundaries, provided that these conformed to U.S. Census Bureau criteria. This option was available to participants in the Census 2000 Redistricting Data Program (the Block Boundary Suggestion Project), American Indian and Alaska Native area Tribal Review (Block Definition Project), and the District of Columbia and the Puerto Rico Block Boundary Definition Project.
The U.S. Census Bureau introduced a different method for identifying the water areas of census blocks. For the 1990 census, water was not uniquely identified within a census block; instead, all water area internal to a block group was given a single block number ending in "99" (for example, in block group 1, all water was identified as block 199). A suffix was added to each water block number where the block existed in more than one tabulation entity within its block group. For Census 2000, water area located completely within the boundary of a single land tabulation block has the same block number as that land block. Water area that touches more than one land block is assigned a unique block number not associated with any adjacent land block. The water block numbers begin with the block group number followed by "999" and proceed in descending order (for example, in block group 3, the numbers assigned to water areas that border multiple land blocks are 3999, 3998, etc.). In some block groups, the numbering of land blocks might use enough of the available numbers to reach beyond the 900 range within the block group. For this reason, and because some land blocks include water (ponds and small lakes), no conclusions about whether a block is all land or all water can be made by looking at the block number. The land/water flag, set at the polygon level in the TIGER database and shown in TIGER/Line and statistical data tabulation files, is the only way to know if a block is all water when viewing the computer files. On maps, water areas are shown with a screen symbol.
Census divisions are groupings of states that are subdivisions of the four census regions. There are nine census divisions, which the U.S. Census Bureau adopted in 1910 for the presentation of data. Each census division is identified by a two-digit census code (see STATE).
Puerto Rico and the Island Areas are not part of any census region or census division. For a list of all census regions and census divisions, and their constituent states, see Attachment C.
Census regions are groupings of states that subdivide the United States for the presentation of data. There are four census regions-Northeast, Midwest, South, and West. Each of the four census regions is divided into two or more census divisions. Before 1984, the Midwest region was named the North Central region. From 1910, when census regions were established, through the 1940s, there were three census regions-North, South, and West. Each census region is identified by a single-digit census code.
Puerto Rico and the Island Areas are not part of any census region or census division. For a list of all census regions and census divisions, and their constituent states, see Attachment C.
Census tracts are small, relatively permanent statistical subdivisions of a county delineated by local participants as part of the U.S. Census Bureau's Participant Statistical Areas Program. The U.S. Census Bureau delineated census tracts in situations where no local participant existed or where local or tribal governments declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of decennial census data. This is the first decennial census for which the entire United States is covered by census tracts. For the 1990 census, some counties had census tracts and others had block numbering areas (BNAs). In preparation for Census 2000, all BNAs were replaced by census tracts, which may or may not cover the same areas.
Census tracts generally have between 1,500 and 8,000 people, with an optimum size of 4,000 people. (Counties with fewer people have a single census tract.) When first delineated, census tracts are designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Census tract boundaries are delineated with the intention of being maintained over many decades so that statistical comparisons can be made from decennial census to decennial census. However, physical changes in street patterns caused by highway construction, new developments, and so forth, may require occasional boundary revisions. In addition, census tracts occasionally are split due to population growth or combined as a result of substantial population decline.
Census tracts are identified by a four-digit basic number and may have a two-digit numeric suffix; for example, 6059.02. The decimal point separating the four-digit basic tract number from the two-digit suffix is shown in the printed reports and on census maps. In computer-readable files, the decimal point is implied. Many census tracts do not have a suffix; in such cases, the suffix field is either left blank or is zero-filled. Leading zeros in a census tract number (for example, 002502) are shown only in computer-readable files. Census tract suffixes may range from .01 to .98. For the 1990 census, the .99 suffix was reserved for census tracts/block numbering areas (BNAs) that contained only crews-of-vessels population. For Census 2000, the crews-of-vessels population is part of the related census tract.
Census tract numbers range from 1 to 9999 and are unique within a county or statistically equivalent entity. The U.S. Census Bureau reserves the basic census tract numbers 9400 to 9499 for census tracts delineated within or to encompass American Indian reservations and off-reservation trust lands that exist in multiple states or counties. The number 0000 in computer-readable files identifies a census tract delineated to provide complete coverage of water area in territorial seas and the Great Lakes.
CONGRESSIONAL DISTRICT (CD)
Congressional districts (CDs) are the 435 areas from which people are elected to the U.S. House of Representatives. After the apportionment of congressional seats among the states, based on census population counts, each state is responsible for establishing CDs for the purpose of electing representatives. Each CD is to be as equal in population to all other CDs in the state as practicable.
The CDs in effect at the time of Census 2000 are those of the 106th Congress, whose session began in January 1999. The CDs of the 103rd Congress (January 1993 to 1995) were the first to reflect redistricting based on the 1990 census. These CD boundaries and numbers remained in effect until after Census 2000, except where a state initiative or a court-ordered redistricting had required a change. Six states redistricted for the 104th Congress (Georgia, Louisiana, Maine, Minnesota, South Carolina, and Virginia), five states redistricted for the 105th Congress (Florida, Georgia, Kentucky, Louisiana, and Texas), and three states (New York, North Carolina, and Virginia) redistricted for the 106th Congress. The 108th Congress will be the first to reflect reapportionment and redistricting based on Census 2000 data.
CDs are identified with a two-digit Federal Information Processing Standards (FIPS) code. The code "00" is used for states with a single representative.
American Samoa, Guam, the Virgin Islands (U.S.), and the District of Columbia are represented in the House of Representatives by a delegate, and Puerto Rico by a resident commissioner, all of whom may not vote on the floor of the House of Representatives, but may vote on legislation as it is considered by committees to which they have been named. In computer-readable data products that display a congressional district field, the two-digit FIPS code "98" is used to identify such representational areas. The Northern Mariana Islands does not have representation in Congress. The FIPS code "99" identifies areas with no representation in Congress.
COUNTY (OR STATISTICALLY EQUIVALENT ENTITY)
The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as "parishes." In Alaska, which has no counties, the statistically equivalent entities are the organized boroughs and the census areas; the latter are delineated cooperatively for statistical purposes by the state of Alaska and the U.S. Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states; these incorporated places are known as independent cities and are treated as equivalent to counties for statistical purposes. (In some data presentations, they may be treated as county subdivisions and places.) The District of Columbia has no primary divisions, and the entire area is considered equivalent to a county for statistical purposes.
Each county and statistically equivalent entity is assigned a three-digit Federal Information Processing Standards code that is unique within state. These codes are assigned in alphabetical order of county or county equivalent within state, except for the independent cities, which are assigned codes higher than and following the listing of counties.
County subdivisions are the primary divisions of counties and statistically equivalent entities for the reporting of decennial census data. They include census county divisions, census subareas, minor civil divisions, and unorganized territories.
Each county subdivision is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within each state.
CENSUS COUNTY DIVISION (CCD)
Census county divisions (CCDs) are county subdivisions that were delineated by the U.S. Census Bureau, in cooperation with state and local officials for purposes of presenting statistical data. CCDs have been established in 21 states where there are no legally established minor civil divisions (MCDs), where the MCDs do not have governmental or administrative purposes, where the boundaries of the MCDs change frequently, and/or where the MCDs generally are not known to the public. CCDs have no legal functions and are not governmental units.
The boundaries of CCDs usually are delineated to follow visible features, and coincide with census tracts where applicable. (In rare instances, two CCDs may constitute a single census tract.) The name of each CCD is based on a place, county, or well-known local name that identifies its location. CCDs have been established in the following 21 states: Alabama, Arizona, California, Colorado, Delaware, Florida, Georgia, Hawaii, Idaho, Kentucky, Montana, Nevada, New Mexico, Oklahoma, Oregon, South Carolina, Tennessee, Texas, Utah, Washington, and Wyoming.
Census subareas are statistical subdivisions of boroughs and census areas (the statistical equivalents of counties) in Alaska. Census subareas are delineated cooperatively by the state of Alaska and the U.S. Census Bureau. They were first used for data presentation purposes as part of the 1980 census.
Minor Civil Division (MCD)
Minor civil divisions (MCDs) are the primary governmental or administrative divisions of a county in many states. MCDs represent many different kinds of legal entities with a wide variety of governmental and/or administrative functions. MCDs are variously designated as American Indian reservations, assessment districts, boroughs, charter townships, election districts, election precincts, gores, grants, locations, magisterial districts, parish governing authority districts, plantations, precincts, purchases, road districts, supervisor's districts, towns, and townships. In some states, all or some incorporated places are not located in any MCD (independent places) and thus serve as MCDs in their own right. In other states, incorporated places are part of the MCDs in which they are located (dependent places), or the pattern is mixed-some incorporated places are independent of MCDs and others are included within one or more MCD. Independent cities, which are statistically equivalent to a county, also are treated as a separate MCD equivalent in states containing MCDs. In Maine and New York, there are American Indian reservations and off-reservation trust lands that serve as MCD equivalents; a separate MCD is created in each case where the American Indian area crosses a county boundary.
The U.S. Census Bureau recognizes MCDs in the following 28 states: Arkansas, Connecticut, Illinois, Indiana, Iowa, Kansas, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Carolina, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Vermont, Virginia, West Virginia, and Wisconsin. The District of Columbia has no primary divisions, and the city of Washington is considered equivalent to an MCD for statistical purposes. Arlington County, VA, also has no MCDs and the entire county is designated as an MCD with the name Arlington.
The MCDs in 12 states (Connecticut, Maine, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont, and Wisconsin) also serve as general-purpose local governments that generally can perform the same governmental functions as incorporated places. The U.S. Census Bureau presents data for these MCDs in all data products in which it provides data for places.
Unorganized territories occur in 10 minor civil division (MCD) states (Arkansas, Indiana, Iowa, Louisiana, Maine, Minnesota, North Carolina, North Dakota, Ohio, and South Dakota) where portions of counties are not included in any legally established MCD or independent incorporated place. The U.S. Census Bureau recognizes such separate pieces of territory as one or more separate county subdivisions for statistical data presentation purposes. It assigns each unorganized territory a descriptive name, followed by the designation unorganized territory. Unorganized territories were first used for statistical data reporting in conjunction with the 1960 census.
Geographic codes are shown primarily in computer-readable data products, such as computer tape and CD-ROM/DVD media, including data tabulations and data tables associated with computer-readable boundary files, but they also are shown on some U.S. Census Bureau maps. Census codes are used only if there is no Federal Information Processing Standards (FIPS) code for the same geographic entity or if the FIPS code is not adequate for data presentation. A code that is not identified as either census or FIPS is usually a census code for which there is no FIPS equivalent. Entities that use only FIPS codes in U.S. Census Bureau products are congressional district, county and statistically equivalent entity, county subdivision, Alaska Native Regional Corporation, metropolitan area (that is, metropolitan statistical area, consolidated metropolitan statistical area, primary metropolitan statistical area, and New England county metropolitan area), place, and state. (A census code exists for each state, but was not assigned in alphabetical sequence and serves to organize the states by census region and census division.)
Census codes are assigned for a variety of geographic entities, including American Indian area, Alaska Native village statistical area, Hawaiian home land, census division, census region, urbanized area, urban cluster, state legislative district, school district, and voting district. The structure, format, and meaning of census codes used in U.S. Census Bureau data products appear in the appropriate technical documentation.
Federal Information Processing Standards (FIPS) Code
Federal Information Processing Standards (FIPS) codes are assigned for a variety of geographic entities, including American Indian area, Alaska Native area, Hawaiian home land, congressional district, county, county subdivision, metropolitan area, place, and state. The structure, format, and meaning of FIPS codes used in U.S. Census Bureau data products appear in the appropriate technical documentation.
The objective of FIPS codes is to improve the ability to use the data resources of the federal government and avoid unnecessary duplication and incompatibilities in the collection, processing, and dissemination of data. The FIPS codes and FIPS code documentation are available online at http://www.itl.nist.gov/fipspubs/index.htm. Further information about the FIPS 5-2, 6-4, and 9-1 publications (states, counties, and congressional districts, respectively) is available from the Geographic Areas Branch, Geography Division, U.S. Census Bureau, Washington, DC 20233-7400, telephone 301-457-1099. Further information about the FIPS 55-DC3 publication (places, consolidated cities, county subdivisions, and noncensus locational entities) is available from the Geographic Names Office, National Mapping Division, U.S. Geological Survey, 523 National Center, Reston, VA 20192, telephone 703-648-4547.
United States Postal Service (USPS) Code
United States Postal Service (USPS) codes for states are used in all decennial census data products. The codes are two-character alphabetic abbreviations. These codes are the same as the Federal Information Processing Standards two-character alphabetic abbreviations.
An internal point is a set of geographic coordinates (latitude and longitude) that is located within a specified geographic entity. A single point is identified for each entity; for many entities, this point represents the approximate geographic center of that entity. If the shape of the entity causes this point to be located outside the boundary of the entity or in a water body, it is relocated to land area within the entity. In computer-readable products, internal points are shown to six decimal places; the decimal point is implied.
The first character of the latitude or longitude is a plus (+) or a minus (-) sign. A plus sign in the latitude identifies the point as being in the Northern Hemisphere, while a minus sign identifies a location in the Southern Hemisphere. For longitude, a plus sign identifies the point as being in the Eastern Hemisphere, while a minus sign identifies a location in the Western Hemisphere.
ISLAND AREAS OF THE UNITED STATES
The Island Areas of the United States are American Samoa, Guam, the Commonwealth of the Northern Mariana Islands (Northern Mariana Islands), and the Virgin Islands of the United States (Virgin Islands). The U.S. Census Bureau treats the Island Areas as the statistical equivalents of states for data presentation purposes. Geographic definitions specific to the Island Areas are shown in the appropriate publications and documentation that accompany the data products for the Island Areas.
Sometimes the Island Areas are referred to as Island Territories or Insular Areas. For the 1990 and previous censuses, the U.S. Census Bureau referred to the entities as Outlying Areas. The term U.S. Minor Outlying Islands refers to certain small islands under U.S. jurisdiction in the Caribbean and Pacific: Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Midway Islands, Navassa Island, Palmyra Atoll, and Wake Island.
METROPOLLITAN AREA (MA)
The general concept of a metropolitan area (MA) is one of a large population nucleus, together with adjacent communities that have a high degree of economic and social integration with that nucleus. Some MAs are defined around two or more nuclei.
The MAs and the central cities within an MA are designated and defined by the federal Office of Management and Budget (OMB), following a set of official standards that are published in a Federal Register Notice. These standards were developed by the interagency Federal Executive Committee on Metropolitan Areas, with the aim of producing definitions that are as consistent as possible for all MAs nationwide.
Each MA must contain either a place with a minimum population of 50,000 or a U.S. Census Bureau-defined urbanized area and a total MA population of at least 100,000 (75,000 in New England). An MA contains one or more central counties. An MA also may include one or more outlying counties that have close economic and social relationships with the central county. An outlying county must have a specified level of commuting to the central counties and also must meet certain standards regarding metropolitan character, such as population density, urban population, and population growth. In New England, MAs consist of groupings of cities and towns rather than whole counties.
The territory, population, and housing units in MAs are referred to as metropolitan. The metropolitan category is subdivided into inside central city and outside central city. The territory, population, and housing units located outside territory designated metropolitan are referred to as nonmetropolitan. The metropolitan and nonmetropolitan classification cuts across the other hierarchies; for example, generally there are both urban and rural territory within both metropolitan and nonmetropolitan areas.
To meet the needs of various users, the standards provide for a flexible structure of metropolitan definitions that classify each MA either as a metropolitan statistical area (MSA) or as a consolidated metropolitan statistical area (CMSA) divided into primary metropolitan statistical areas (PMSAs). In New England, there also is an alternative county-based definition of MSAs known as the New England County Metropolitan Areas (NECMAs). (See definitions below.) Documentation of the MA standards and how they are applied is available from the Population Distribution Branch, Population Division, U.S. Census Bureau, Washington, D.C., 20233-8800, telephone 301-457-2419.
In each metropolitan statistical area and consolidated metropolitan statistical area, the largest place and, in some cases, additional places are designated as central cities under the official standards. A few primary metropolitan statistical areas do not have central cities. The largest central city and, in some cases, up to two additional central cities, are included in the title of the metropolitan area (MA); there also are central cities that are not included in an MA title. An MA central city does not include any part of that place that extends outside the MA boundary.
Consolidated and Primary Metropolitan Statistical Area (CMSA and PMSA)
If an area that qualifies as a metropolitan area (MA) has more than one million people, two or more primary metropolitan statistical areas (PMSAs) may be defined within it. Each PMSA consists of a large urbanized county or cluster of counties (cities and towns in New England) that demonstrate very strong internal economic and social links, in addition to close ties to other portions of the larger area. When PMSAs are established, the larger MA of which they are component parts is designated a consolidated metropolitan statistical area (CMSA). CMSAs and PMSAs are established only where local governments favor such designations for a large MA.
Metropolitan Statistical Area (MSA)
Metropolitan statistical areas (MSAs) are metropolitan areas (MAs) that are not closely associated with other MAs. These areas typically are surrounded by nonmetropolitan counties (county subdivisions in New England).
Metropolitan Area Title and Code
The title of a metropolitan statistical area (MSA) contains the name of its largest central city and up to two additional place names, provided that the additional places meet specified levels of population, employment, and commuting. Generally, a place with a population of 250,000 or more is in the title, regardless of other criteria.
The title of a primary metropolitan statistical area (PMSA) may contain up to three place names, as determined above, or up to three county names, sequenced in order of population size, from largest to smallest. A consolidated metropolitan statistical area (CMSA) title also may include up to three names, the first of which generally is the most populous central city in the area. The second name may be the first city or county name in the most populous remaining PMSA; the third name may be the first city or county name in the next most populous PMSA. A regional designation may be substituted for the second and/or third names in a CMSA title if local opinion supports such a designation and the federal Office of Management and Budget (OMB) deems it to be unambiguous and suitable.
The titles for all metropolitan areas (MAs) also contain the U.S. Postal Service's abbreviation for the name of each state in which the MA is located. Each MA is assigned a four-digit Federal Information Processing Standards (FIPS) code, in alphabetical order nationwide. If the fourth digit of the code is "2", it identifies a CMSA. Additionally, there is a separate set of two-digit FIPS codes for CMSAs, also assigned alphabetically.
New England County Metropolitan Area (NECMA)
New England county metropolitan areas (NECMAs) are defined as a county-based alternative to the city- and town-based New England metropolitan statistical areas (MSAs) and consolidated metropolitan statistical areas (CMSAs). The NECMA defined for an MSA or a CMSA includes:
Central cities of a NECMA are those places in the NECMA that qualify as central cities of an MSA or a CMSA. NECMA titles derive from the names of these central cities. Each NECMA is assigned a four-digit Federal Information Processing Standards code.
Places, for the reporting of decennial census data, include census designated places, consolidated cities, and incorporated places. Each place is assigned a five-digit Federal Information Processing Standards (FIPS) code, based on the alphabetical order of the place name within each state. If place names are duplicated within a state and they represent distinctly different areas, a separate code is assigned to each place name alphabetically by primary county in which each place is located, or if both places are in the same county, alphabetically by their legal description (for example, city before village).
Census Designated Place (CDP)
Census designated places (CDPs) are delineated for each decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name but are not legally incorporated under the laws of the state in which they are located. The boundaries usually are defined in cooperation with local or tribal officials. These boundaries, which usually coincide with visible features or the boundary of an adjacent incorporated place or other legal entity boundary, have no legal status, nor do these places have officials elected to serve traditional municipal functions. CDP boundaries may change from one decennial census to the next with changes in the settlement pattern; a CDP with the same name as in an earlier census does not necessarily have the same boundary.
There are no population size requirements for the CDPs designated in conjunction with Census 2000. For the 1990 census and earlier censuses, the U.S. Census Bureau required CDPs to qualify on the basis of various minimum population size criteria.
Beginning with the 1950 census, the U.S. Census Bureau, in cooperation with state and local governments (and American Indian tribal officials starting with the 1990 census), identified and delineated boundaries and names for CDPs. In the data products issued in conjunction with Census 2000, the name of each such place is followed by "CDP," as was the case for the 1990 and 1980 censuses. In the data products issued in conjunction with the 1950, 1960, and 1970 censuses, these places were identified by (U), meaning unincorporated place.
Hawaii is the only state that has no incorporated places recognized by the U.S. Census Bureau. All places shown in the data products for Hawaii are CDPs. By agreement with the state of Hawaii, the U.S. Census Bureau does not show data separately for the city of Honolulu, which is coextensive with Honolulu County.
A consolidated government is a unit of local government for which the functions of an incorporated place and its county or minor civil division (MCD) have merged. The legal aspects of this action may result in both the primary incorporated place and the county or MCD continuing to exist as legal entities, even though the county or MCD performs few or no governmental functions and has few or no elected officials. Where this occurs, and where one or more other incorporated places in the county or MCD continue to function as separate governments, even though they have been included in the consolidated government, the primary incorporated place is referred to as a consolidated city.
The presentation of data for consolidated cities varies depending on the geographic presentation. In some hierarchical presentations, consolidated cities are not shown. These presentations include the semi-independent places (identified in data tabulations for places within a consolidated city) and the consolidated city (balance). Where the consolidated city is coextensive with a county or county subdivision, the data shown for it in hierarchical presentations are the same as those for the consolidated government.
For inventory geographic presentations, the consolidated city appears at the end of the listing of places. The data for the consolidated city include the data for all places that are part of and within the consolidated city. The consolidated city (balance) entry shows the data for the portion of the consolidated government minus the semi-independent places, and is shown in alphabetical sequence with other places that comprise the consolidated city. These entities, treated for data presentation purposes as statistically equivalent to a place, have no legal basis or functions.
In summary presentations by size of place, the consolidated city is not included. The places within consolidated cities are categorized by their size, as is the consolidated city (balance). A few incorporated places are partially inside and partially outside a consolidated city. Data tabulations by place will include all territory within the place, while the tabulation for the place within a consolidated city is only for part of the place.
Each consolidated city is assigned a five-digit Federal Information Processing Standards (FIPS) code that is unique within state. The semi-independent places and the consolidated city (balance) also are assigned five-digit FIPS place codes that are unique within state. The code assigned to each place within a consolidated city is the same as its regular place code; a place that is partially included in a consolidated city does not have a different code for the portions inside and outside the consolidated city. FIPS codes are assigned based on alphabetical sequence within each state.
Incorporated places recognized in decennial census data products are those reported to the U.S. Census Bureau as legally in existence on January 1, 2000, under the laws of their respective states, as cities, boroughs, towns, and villages, with the following exceptions: the towns in the New England states, New York, and Wisconsin, and the boroughs in New York are recognized as minor civil divisions for decennial census purposes; the boroughs in Alaska are county equivalents for decennial census statistical presentation purposes. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places known as independent cities that are primary divisions of a state and legally not part of any county. For data presentation purposes, the U.S. Census Bureau may treat an independent city as a county equivalent, county subdivision, and place. There are a few incorporated places that do not have a legal description. An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division, which generally is created to provide services or administer an area without regard, necessarily, to population.
POPULATION OR HOUSING UNIT DENSITY
Population and housing unit density are computed by dividing the total population or number of housing units within a geographic entity (for example, United States, state, county, place) by the land area of that entity measured in square kilometers or square miles. Density is expressed as both "people (or housing units) per square kilometer" and "people (or housing units) per square mile" of land area.
PUBLIC USE MICRODATA AREA (PUMA)
A public use microdata area (PUMA) is a decennial census area for which the U.S. Census Bureau provides specially selected extracts of raw data from a small sample of long-form census records that are screened to protect confidentiality. These extracts are referred to as Public Use Microdata Sample (PUMS) files. Since 1960 data users have been using these files to create their own statistical tabulations and data summaries. For Census 2000, state participants, following U.S. Census Bureau criteria, delineated two types of PUMAs within their states. PUMAs of one type comprise areas that contain at least 100,000 people. The PUMS files for these PUMAs contain a 5-percent sample of the long form records. The other type of PUMAs, super PUMAs, comprise areas of at least 400,000 people. The sample size is 1 percent of the PUMS files for these PUMA areas.
PUMAs cannot be in more than one state. The larger 1-percent PUMAs are aggregations of the smaller 5-percent PUMAs. PUMAs of both types, wherever the population size criteria permits, comprise areas that are entirely within or outside metropolitan areas or the central cities of metropolitan areas.
The U.S. Census Bureau treats the Commonwealth of Puerto Rico as the statistical equivalent of a state. Each state and statistically equivalent entity is assigned a two-digit Federal Information Processing Standards (FIPS) code in alphabetical order by state name, followed in alphabetical order by Puerto Rico and the Island Areas. Each state and statistically equivalent entity also is assigned the two-letter FIPS/U.S. Postal Service code.
The primary legal divisions of Puerto Rico are termed municipios. The U.S. Census Bureau, for statistical purposes, treats a municipio as the equivalent of a county in the United States.
Each municipio is assigned a unique three-digit Federal Information Processing Standards (FIPS) code in alphabetical order within Puerto Rico.
Barrio, Barrio-Pueblo, and Subbarrio
The U.S. Census Bureau recognizes barrios and barrios-pueblo as the primary legal divisions of municipios. These entities are similar to the minor civil divisions (MCDs) used for reporting decennial census data in 28 states of the United States. Subbarrios in 23 municipios are the primary legal subdivisions of the barrios-pueblo and some barrios. The U.S. Census Bureau presents the same types of Census 2000 data for these sub-MCDs as it does for the barrios and barrios-pueblo. (There is no geographic entity in the United States equivalent to the subbarrio.)
Each barrio, barrio-pueblo, and subbarrio is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within Puerto Rico.
Zona Urbana and Comunidad
There are no incorporated places in Puerto Rico; instead, the U.S. Census Bureau provides decennial census data for two types of census designated places (CDPs): (1) zonas urbanas, representing the governmental center of each municipio and (2) comunidades, representing other settlements. For Census 2000, there are no minimum population size requirements for CDPs. (For the 1990 census, the U.S. Census Bureau had required comunidades to have at least 1,000 people.)
Each zona urbana and comunidad is assigned a five-digit Federal Information Processing Standards (FIPS) code in alphabetical order within Puerto Rico.
Some types of geographic entities do not apply in Puerto Rico. For instance, Puerto Rico is not in any census region or census division. In addition, the U.S. Census Bureau does not tabulate data for school districts, state legislative districts, and traffic analysis zones in Puerto Rico. (See also CONGRESSIONAL DISTRICT (CD)).
School districts are geographic entities within which state, county, or local officials provide public educational services for the area's residents. The U.S. Census Bureau obtains the boundaries and names for school districts from state officials. The U.S. Census Bureau first provided data for school districts in the 1970 census. For Census 2000, the U.S. Census Bureau tabulated data for three types of school districts: elementary (grades ranging K-8), secondary (grades ranging 7-12), and unified (grades ranging K-12).
Each school district is assigned a five-digit code that is unique within state. School district codes are assigned by the Department of Education and are not necessarily in alphabetical order by school district name.
STATE (OR STATISTICALLY EQUIVALENT ENTITY)
States are the primary governmental divisions of the United States. The District of Columbia is treated as a statistical equivalent of a state for decennial census purposes, as are Puerto Rico and each of the four Island Areas.
Each state and statistically equivalent entity is assigned a two-digit numeric Federal Information Processing Standards (FIPS) code in alphabetical order by state name, followed in alphabetical order by the Island Areas and Puerto Rico. Each state and statistically equivalent entity also is assigned a two-letter FIPS/U.S. Postal Service code and a two-digit census code. The census code is assigned on the basis of the geographic sequence of each state within each census division; the first digit of the code identifies the respective division, except for Puerto Rico and the Island Areas, which are not assigned to any region or division. The census regions, divisions, and their component states are listed in Attachment C.
STATE LEGISLATIVE DISTRICT (SLD)
State legislative districts (SLDs) are the areas from which members are elected to state legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. (Nebraska has a unicameral legislature that the U.S. Census Bureau treats as an upper-chamber legislative area for purposes of data presentation. There are, therefore, no data by lower chamber.) It is possible to have SLDs that cover only part of a state. In such instances, any areas for which SLDs are not defined are coded "ZZZ" and treated as a single SLD for purposes of data presentation. A unique census code of up to three characters, identified by state participants, is assigned to each SLD within state.
As an option in the Census 2000 Redistricting Data Program (Public Law 94-171), participating states receive P.L. 94-171 census data for their SLDs (see VOTING DISTRICT). Not all states delineated SLDs for Census 2000 data tabulation purposes, in which case the entire state is treated as a single SLD coded with blanks at both levels.
TIGER is an acronym for the Topologically Integrated Geographic Encoding and Referencing (System or database). It is a digital (computer-readable) geographic database that automates the mapping and related geographic activities required to support the U.S. Census Bureau's census and survey programs. The U.S. Census Bureau developed the TIGER System to automate the geographic support processes needed to meet the major geographic needs of the 1990 census: producing the cartographic products to support data collection and map presentations, providing the geographic structure for tabulation and dissemination of the collected statistical data, assigning residential and employer addresses to the correct geographic location and relating those locations to the geographic entities used for data tabulation and so forth. The content of the TIGER database is undergoing continuous updates, and is made available to the public through a variety of TIGER/Line® files that may be obtained from Customer Services, U.S. Census Bureau, Washington, DC 20233-1900, telephone 301-763-INFO(4636), or downloaded from the Internet
TRAFFIC ANALYSIS ZONE (TAZ)
A traffic analysis zone (TAZ) is a special area delineated by state and/or local transportation officials for tabulating traffic-related data- especially journey-to-work and place-of-work statistics. A TAZ usually consists of one or more census blocks, block groups, or census tracts. For the 1990 census, TAZs were defined as part of the Census Transportation Planning Package (CTPP). The U.S. Census Bureau first provided data for TAZs in conjunction with the 1980 census, when it identified them as traffic zones.
Each TAZ is identified by a six-character alphanumeric code that is unique within county or statistically equivalent entity. For the 1990 census, TAZ codes were unique within CTPP area, which generally conformed to a metropolitan area.
The United States consists of the 50 states and the District of Columbia.
URBAN AND RURAL*
The U.S. Census Bureau classifies as urban all territory, population, and housing units located within an urbanized area (UA) or an urban cluster (UC). It delineates UA and UC boundaries to encompass densely settled territory, which consists of:
In addition, under certain conditions, less densely settled territory may be part of each UA or UC.
A portion of an incorporated place is classified as rural if it has been defined as an extended place; the urban portion(s) is located within the UA or UC. A census designated place (CDP) may be located partly within and partly outside of the UA or the UC with which it is associated; such CDPs will contain both an urban and a rural part.
Rural consists of all territory, population, and housing units located outside of UAs and UCs. It contains both place and nonplace territory. Geographic entities, such as census tracts, counties, metropolitan areas, and the area outside metropolitan areas, often contain both urban and rural territory, population, and housing units.
* This definition will not be final until its publication in the final Federal Register Notice, which will take place at the end of 2001.
Urban Cluster (UC)
An urban cluster (UC) consists of densely settled territory that has at least 2,500 people but fewer than 50,000 people.
The U.S. Census Bureau introduced the UC for Census 2000 to provide a more consistent and accurate measure of the population concentration in and around places. UCs replace the provision in the 1990 and previous censuses that defined as urban only those places with 2,500 or more people located outside of urbanized areas, excluding those portions of extended cities classified as rural.
Urban Cluster Central Place-A central place functions as the dominant center of a UC. The U.S. Census Bureau identifies one or more central places for each UC, with a preference for the most populous incorporated place(s).
Urban Cluster Title and Code-The title of a UC may contain up to three incorporated place names, and will include the two-letter U.S. Postal Service code for each state into which the UC extends. However, in UCs with no incorporated places, the title may include only one census designated place name.
Each UC is assigned a five-digit census code in alphabetical sequence on a nationwide basis. The alphabetic assignment of codes for urban areas includes both UAs and UCs. A separate flag is included in data tabulation files to differentiate between UAs and UCs. In printed reports, this differentiation is included in the name.
Urbanized Area (UA)
An urbanized area (UA) consists of densely settled territory that contains 50,000 or more people. A UA may contain both place and nonplace territory. The U.S. Census Bureau delineates UAs to provide a better separation of urban and rural territory, population, and housing in the vicinity of large places. At least 35,000 people in a UA must live in an area that is not part of a military reservation.
For the 1990 and previous censuses, the U.S. Census Bureau delineated as UAs territory containing one or more places (central place) and the adjacent densely settled surrounding territory (urban fringe). The urban fringe generally consisted of contiguous territory having a density of at least 1,000 people per square mile.
For Census 2000, UA delineations constitute a zero-based approach that requires no grandfathering of UA boundaries from the 1990 census. Because of the more stringent density requirements (and the less restrictive extended place criteria), some territory that was classified as urbanized for the 1990 census has been reclassified as rural. In addition, some areas that were identified as UAs for the 1990 census have been reclassified as urban clusters.
Urbanized Area Central Place-One or more central places function as the dominant centers of each urbanized area (UA). (Central place(s) may be census designated places or incorporated places.) The identification of a UA central place permits the comparison of this dominant center with the remaining territory in the UA. There is no limit on the number of central places, but not all central places are necessarily included in the UA title. UA central places include:
Urbanized Area Title and Code-The title of an urbanized area (UA) identifies those places that are most populous within the UA; it links the UA to the encompassing metropolitan area (MA), where appropriate. If the UA does not contain any incorporated place that is a central city of an MA or if the UA is not located in an MA, the U.S. Census Bureau uses the population size of the included places, with a preference for incorporated places, to determine the UA title. The UA title may contain up to three place names and will include the name of each state into which the UA extends.
Each UA is assigned a five-digit census code in alphabetical sequence on a nationwide basis, interspersed with the codes for urban clusters (UCs), also in alphabetical sequence. For the 1990 census, the U.S. Census Bureau assigned a four-digit UA code based on the MA codes. For Census 2000, a separate flag is included in data tabulation files to differentiate between UAs and UCs. In printed reports, this differentiation is included in the name.
The U.S. Census Bureau classifies the less densely settled portions of incorporated places and census designated places as rural and the more densely settled portions as urban on the basis of population density and land area.
A place is defined as extended if portions of its territory have a population density lower than 500 people per square mile. Such pieces of area must comprise 25 percent or more of the total land area of the place or cover at least 5 square miles. These areas constitute the rural portion of the extended place. Both urbanized areas (UAs) and urban clusters (UCs) may contain extended places. Because the urban classification for Census 2000 is more closely tied to population density, a place can have portions in multiple UAs, multiple UCs, or a combination of a UA and a UC, and also can qualify as an extended place that has territory, population, and housing units classified as rural.
For the 1990 and previous censuses, extended places were called extended cities. An extended city had to contain either 25 percent of the total land area or at least 25 square miles with an overall population density lower than 100 people per square mile. Such pieces of territory had to cover at least 5 square miles. This low-density area was classified as rural and the other, more densely settled portion of the incorporated place was classified as urban. For the 1970 and 1980 censuses, the U.S. Census Bureau identified extended cities only within UAs. For the 1990 census, the U.S. Census Bureau also applied this classification to qualifying incorporated places located outside UAs.
Because of the more liberal density criteria (fewer than 500 people per square mile instead of fewer than 100), there are more extended places and more territory, population, and housing units classified as rural within places. By contrast, the extended cities of the 1990 and earlier censuses primarily affected the figures for urban and rural territory (area), but had very little effect on the urban and rural population and housing unit figures at national and state levels.
Documentation of the UA, UC, and extended place criteria is available from the Geographic Areas Branch, Geography Division, U.S. Census Bureau, Washington, DC 20233-7400, telephone 301-457-1099.
URBAN GROWTH AREA (UGA)
An urban growth area (UGA) is a legally defined entity in Oregon that the U.S. Census Bureau includes in the TIGER® database in agreement with the state. UGAs, which are defined around incorporated places, are used to regulate urban growth. UGA boundaries, which need not follow visible features, are delineated cooperatively by state and local officials and then confirmed in state law. UGAs, which are a pilot project, are a new geographic entity for Census 2000.
Each UGA is identified by a five-character alphanumeric census code, assigned alphabetically within Oregon.
VOTING DISTRICT (VTD)
Voting district (VTD) is the generic name for geographic entities, such as precincts, wards, and election districts, established by state, local, and tribal governments for the purpose of conducting elections. States participating in the Census 2000 Redistricting Data Program as part of Public Law 94-171 (1975) may provide boundaries, codes, and names for their VTDs to the U.S. Census Bureau. The U.S. Census Bureau first reported data for VTDs following the 1980 census. Because the U.S. Census Bureau requires that VTDs follow boundaries of census blocks, participating states often adjusted the boundaries of the VTDs they submit for data tabulation purposes to conform to census block boundaries. If requested by the participating state, the U.S. Census Bureau identifies these adjusted VTDs as pseudo-VTDs.
For Census 2000, each VTD is identified by a one- to six-character alphanumeric census code that is unique within county. The code "ZZZZZZ" identifies parts of a county in which no VTDs were identified. For a state or county that did not participate in the VTD project, the code fields are blank.
ZIPä CODE TABULATION AREA (ZCTAä )
A ZIP Code Tabulation Area (ZCTATM) is a statistical geographic entity that approximates the delivery area for a U.S. Postal Service five-digit or three-digit ZIP Code. ZCTAs are aggregations of census blocks that have the same predominant ZIP Code associated with the addresses in the U.S. Census Bureau's Master Address File. Three-digit ZCTA codes are applied to large contiguous areas for which the U.S. Census Bureau does not have five-digit ZIP Code information in its Master Address File. ZCTAs do not precisely depict ZIP Code delivery areas, and do not include all ZIP Codes used for mail delivery. The U.S. Census Bureau has established ZCTAs as a new geographic entity similar to, but replacing, data tabulations for ZIP Codes undertaken in conjunction with the 1990 and earlier censuses.
Attachment A: Standard Hierarchy of Census Geographic Entities
Attachment B: Hierarchy of American Indian, Alaska Native, and Native Hawaiian Entities
Attachment C: Census Regions, Census Divisions, and Their Constituent States
New England Division:
Maine, New Hampshire, Vermont, Massachusetts, Rhode Island, Connecticut
Middle Atlantic Division:
New York, New Jersey, Pennsylvania
East North Central Division:
Ohio, Indiana, Illinois, Michigan, Wisconsin
West North Central Division:
Minnesota, Iowa, Missouri, North Dakota, South Dakota, Nebraska, Kansas
South Atlantic Division:
Delaware, Maryland, District of Columbia, Virginia, West Virginia, North Carolina, South Carolina, Georgia, Florida
East South Central Division:
Kentucky, Tennessee, Alabama, Mississippi
West South Central Division:
Arkansas, Louisiana, Oklahoma, Texas
Montana, Idaho, Wyoming, Colorado, New Mexico, Arizona, Utah, Nevada
Washington, Oregon, California, Alaska, Hawaii