end of header
Foreign Trade
You are here: Census.gov › Business & Industry › Foreign Trade › Schedule B
| Section XV - Chapter 76 | |||
| Aluminum and Articles Thereof | |||
| Note | |||
| 1. | In this chapter the following expressions have the meanings hereby assigned to them: | ||
| (a). | Bars and rods | ||
| Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flatte | |||
| (b). | Profiles | ||
| Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also co | |||
| (c). | Wire | ||
| Rolled, extruded or drawn products, in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" | |||
| (d). | Plates, sheets, strip and foil | ||
| Flat-surfaced products (other than the unwrought products of heading 7601), coiled or not, of solid rectangular (other than square) cross section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, | |||
| - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width, | |||
| - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. | |||
| Headings 7606 and 7607 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, checkers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they | |||
| (e). | Tubes and pipes | ||
| Hollow products, coiled or not, which have a uniform cross section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a unif | |||
| Subheading Notes | |||
| 1. | In this chapter the following expressions have the meanings hereby assigned to them: | ||
| (a). | Aluminum, not alloyed | ||
| Metal containing by weight at least 99 percent of aluminum, provided that the content by weight of any other element does not exceed the limit specified in the following table: | |||
| TABLE - Other elements | |||
| Element | |||
| Fe+Si (Iron plus Silicon) | |||
| Other elements (1), each | |||
| (1). | |||
| (2). | |||
| (b). | Aluminum alloys | ||
| Metallic substances in which aluminum predominates by weight over each of the other elements provided that: | |||
| (1) | |||
| (2) | |||
| (b). | Aluminum alloys | ||
| Metallic substances in which aluminum predominates by weight over each of the other elements provided that: | |||
| (i). The content by weight of at least one of the elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table, or | |||
| (ii). The total content by weight of elements other than nickel plus cobalt exceeds 1 percent. | |||
| 2. | Notwithstanding the provisions of note 1 (c), for the purpose of subheading 7616.91 the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. | ||
| Statistical Note | |||
| 1. | For the purposes of this chapter, the term "aluminum vanadium master alloy" refers to aluminum alloys which contain by weight 20 percent or more of vanadium. | ||
| Schedule B No. and Headings | Commodity Description | Unit of Quantity | Second Quantity |
|---|---|---|---|
| 76 | Aluminum and Articles Thereof | ||
| 7601 | - Unwrought aluminum: | ||
| 7601.10.0000 | - - Aluminum, not alloyed | kg | |
| 7601.20 | - - Aluminum alloys: | ||
| 7601.20.9030 | - - - Aluminum vanadium master alloy | kg | |
| - - - Other: | |||
| 7601.20.9045 | - - - - Of uniform circular cross section throughout its length, not in coils | kg | |
| - - - - Other: | |||
| 7601.20.9075 | - - - - - Remelt scrap ingot | kg | |
| 7601.20.9500 | - - - - - Other | kg | |
| 7602 | - Aluminum waste and scrap: | ||
| 7602.00.0030 | - - Used beverage container scrap | kg | |
| 7602.00.0090 | - - Other | kg | |
| 7603 | - Aluminum powders and flakes: | ||
| 7603.10.0000 | - - Powders of nonlamellar structure | kg | |
| 7603.20.0000 | - - Powders of lamellar structure; flakes | kg | |
| 7604 | - Aluminum bars, rods and profiles: | ||
| 7604.10 | - - Of aluminum, not alloyed: | ||
| 7604.10.1000 | - - - Profiles | kg | |
| - - - Bars and rods: | |||
| - - - - Having a round cross section: | |||
| 7604.10.3010 | - - - - - With an outside diameter of less than 10 mm (0.39 inch) | kg | |
| 7604.10.3050 | - - - - - With an outside diameter of 10 mm (0.39 inch) or more | kg | |
| - - - - Other: | |||
| 7604.10.5030 | - - - - - With a maximum cross sectional dimension of less than 10 mm (0.39 inch) | kg | |
| 7604.10.5060 | - - - - - With a maximum cross sectional dimension of 10 mm (0.39 inch) or more | kg | |
| - - Of aluminum alloys: | |||
| 7604.21.0000 | - - - Hollow profiles | kg | |
| 7604.29 | - - - Other: | ||
| 7604.29.1000 | - - - - Other profiles | kg | |
| - - - - Bars and rods: | |||
| - - - - - Having a round cross section: | |||
| 7604.29.3010 | - - - - - - With an outside diameter of less than 10 mm (0.39 inch) | kg | |
| 7604.29.3050 | - - - - - - With an outside diameter of 10 mm (0.39 inch) or more | kg | |
| - - - - - Other: | |||
| 7604.29.5030 | - - - - - - With a maximum cross-sectional dimension of less than 10 mm (0.39 inch) | kg | |
| 7604.29.5060 | - - - - - - With a maximum cross-sectional dimension of 10 mm (0.39 inch or more | kg | |
| 7605 | - Aluminum wire: | ||
| - - Of aluminum, not alloyed: | |||
| 7605.11 | - - - Of which the maximum cross-sectional dimension exceeds 7 mm (0.276 inch): | ||
| 7605.11.0030 | - - - - Of which the maximum cross-sectional dimension exceeds 9.5 mm (0.374 inch) | kg | |
| 7605.11.0090 | - - - - Other | kg | |
| 7605.19.0000 | - - - Other | kg | |
| - - Of aluminum alloys: | |||
| 7605.21 | - - - Of which the maximum cross-sectional dimension exceeds 7 mm (0.276 inch): | ||
| 7605.21.0030 | - - - - Of which the maximum cross-sectional dimension exceeds 9.5 mm (0.374 inch) | kg | |
| 7605.21.0090 | - - - - Other | kg | |
| 7605.29.0000 | - - - Other | kg | |
| 7606 | - Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm (0.0079 inch): | ||
| - - Rectangular (including square): | |||
| 7606.11 | - - - Of aluminum, not alloyed: | ||
| - - - - Not clad: | |||
| 7606.11.3030 | - - - - - More than 6.3 mm (0.248 inch) in thickness | kg | |
| 7606.11.3060 | - - - - - 6.3 mm (0.248 inch) or less in thickness | kg | |
| 7606.11.6000 | - - - - Clad | kg | |
| 7606.12 | - - - Of aluminum alloys: | ||
| - - - - Not clad: | |||
| 7606.12.3030 | - - - - - More than 6.3 mm (0.248 inch) in thickness | kg | |
| 7606.12.3070 | - - - - - 6.3 mm (0.248 inch) or less in thickness | kg | |
| 7606.12.6000 | - - - - Clad | kg | |
| - - Other: | |||
| 7606.91 | - - - Of aluminum, not alloyed: | ||
| - - - - More than 6.3 mm (0.248 inch) in thickness: | |||
| 7606.91.0010 | - - - - - Circles and discs | kg | |
| 7606.91.0050 | - - - - - Other | kg | |
| - - - - 6.3 mm (0.248 inch) or less in thickness: | |||
| 7606.91.0070 | - - - - - Circles and discs | kg | |
| 7606.91.0090 | - - - - - Other | kg | |
| 7606.92 | - - - Of aluminum alloys: | ||
| - - - - More than 6.3 mm (0.248 inch) in thickness: | |||
| 7606.92.0010 | - - - - - Circles and discs | kg | |
| 7606.92.0050 | - - - - - Other | kg | |
| - - - - 6.3 mm (0.248 inch) or less in thickness: | |||
| 7606.92.0070 | - - - - - Circles and discs | kg | |
| 7606.92.0090 | - - - - - Other | kg | |
| 7607 | - Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm (0.0079 inch): | ||
| - - Not backed: | |||
| 7607.11 | - - - Rolled but not further worked: | ||
| - - - - Of a thickness not exceeding 0.15 mm (0.0059 inch): | |||
| 7607.11.3000 | - - - - - Of a thickness not exceeding 0.01 mm (0.00039 inch) | kg | |
| 7607.11.6000 | - - - - - Of a thickness exceeding 0.01 mm (0.00039 inch) | kg | |
| 7607.11.9000 | - - - - Other | kg | |
| 7607.19.0000 | - - - Other | kg | |
| 7607.20.0000 | - - Backed | kg | |
| 7608 | - Aluminum tubes and pipes: | ||
| 7608.10 | - - Of aluminum, not alloyed: | ||
| 7608.10.0030 | - - - Seamless | kg | |
| 7608.10.0090 | - - - Other | kg | |
| 7608.20 | - - Of aluminum alloys: | ||
| 7608.20.0030 | - - - Seamless | kg | |
| 7608.20.0090 | - - - Other | kg | |
| 7609.00.0000 | - Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | kg | |
| 7610 | - Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures: | ||
| 7610.10.0000 | - - Doors, windows and their frames and thresholds for doors | kg | |
| 7610.90 | - - Other: | ||
| 7610.90.0020 | - - - Sheet-metal roofing, siding, flooring, and roof guttering and other drainage equipment | kg | |
| 7610.90.0040 | - - - Architectural and ornamental work | kg | |
| 7610.90.0050 | - - - Other | kg | |
| 7611 | - Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters (79.3 gallons), whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | ||
| 7611.00.0030 | - - Tanks | No. | |
| 7611.00.0090 | - - Other | No. | |
| 7612 | - Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters (79.3 gallons), whether or not lined or insulated, but not fitted with mechanical or thermal equipment: | ||
| 7612.10.0000 | - - Collapsible tubular containers | No. | |
| 7612.90 | - - Other: | ||
| 7612.90.1030 | - - - Cans of a capacity not exceeding 355 ml (12 oz.) | No. | |
| 7612.90.1060 | - - - Cans of a capacity exceeding 355 ml (12 oz.) but less than 3.8 liters (1gallon) | No. | |
| 7612.90.9000 | - - - Other | No. | |
| 7613.00.0000 | - Aluminum containers for compressed or liquefied gas | No. | |
| 7614 | - Stranded wire, cables, plaited bands and the like, including slings and similar articles of aluminum, not electrically insulated: | ||
| 7614.10.0000 | - - With steel core | kg | |
| 7614.90 | - - Other: | ||
| 7614.90.1000 | - - - Not fitted with fittings and not made up into articles | kg | |
| 7614.90.5000 | - - - Fitted with fittings, or made up into articles | kg | |
| 7615 | - Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum: | ||
| 7615.10 | - - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: | ||
| 7615.10.1100 | - - - Pot scourers and scouring or polishing pads, gloves and the like | kg | |
| - - - Cooking and kitchenware: | |||
| 7615.10.4000 | - - - - Cast | No. | |
| 7615.10.6000 | - - - - Other | No. | |
| 7615.10.9100 | - - - Other | kg | |
| 7615.20.0000 | - - Sanitary ware and parts thereof | kg | |
| 7616 | - Other articles of aluminum: | ||
| 7616.10 | - - Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles: | ||
| 7616.10.1000 | - - - Nails, tacks, and staples | kg | |
| 7616.10.3000 | - - - Rivets | kg | |
| 7616.10.5000 | - - - Cotters and cotter-pins | kg | |
| - - - Other: | |||
| 7616.10.6000 | - - - - Threaded fasteners | kg | |
| 7616.10.8000 | - - - - Other | kg | |
| - - Other: | |||
| 7616.91.0000 | - - - Cloth, grill, netting and fencing, of aluminum wire | kg | |
| 7616.99 | - - - Other: | ||
| 7616.99.5130 | - - - - Ladders | No. | |
| 7616.99.5140 | - - - - Venetian blinds and parts thereof | X | |
| 7616.99.5150 | - - - - Hangers and supports for pipes and tubes | kg | |
| 7616.99.5160 | - - - - Castings | kg | |
| 7616.99.5170 | - - - - Forgings | kg | |
| - - - - Other: | |||
| 7616.99.5175 | - - - - - Articles of wire | kg | |
| 7616.99.5195 | - - - - - Other | kg |
[Excel] or the letters [xls] indicate a document is in the Microsoft® Excel® Spreadsheet Format (XLS). To view the file, you will need the Microsoft® Excel® Viewer 
available for free from Microsoft®.
[MSWord] or the letters [doc] indicate a document is in the Microsoft® Word Format (DOC). To view the file, you will need the Microsoft® Word Viewer available for free from Microsoft®.
This symbol indicates a link to a non-government web site. Our linking to these sites does not constitute an endorsement of any products, services or the information found on them. Once you link to another site you are subject to the policies of the new site.
available for free from Microsoft®.
[MSWord] or the letters [doc] indicate a document is in the Microsoft® Word Format (DOC). To view the file, you will need the Microsoft® Word Viewer available for free from Microsoft®.
This symbol indicates a link to a non-government web site. Our linking to these sites does not constitute an endorsement of any products, services or the information found on them. Once you link to another site you are subject to the policies of the new site.